What have you done to your Landie today.

spent most of the day under the car doing rear diff seal, nearly gived in trying to get caster nut off.everything went fine just unsure about torque setting for main nut. now that i know how to do seal might do front tomorrow

Decided to clean the bottle jack and the box it sits in - was a bit dusty and unloved. Sad ain't I? Whilst in there I pulled the Disco's brains out and unplugged it, only to find engine oil in the red plug. So cleaned that bugger out too. Guess I'll have to buy a new injector loom

Diff.

DIFFLOCK66 said:

Decided to clean the bottle jack and the box it sits in - was a bit dusty and unloved. Sad ain't I? Whilst in there I pulled the Disco's brains out and unplugged it, only to find engine oil in the red plug. So cleaned that bugger out too. Guess I'll have to buy a new injector loom

Diff.

Click to expand...

make sure you get a good quality one,not a ****part brand.

Should I get one now or wait until it misfires??

Ta,

Diff.

DIFFLOCK66 said:

Should I get one now or wait until it misfires??

Ta,

Diff.

Click to expand...

change the oil seal in the cyl head first,then buy a new one.some say clean it but why??.

Okey dokey. I'll get that organised then. Cheers!

Diff.

DIFFLOCK66 said:

Okey dokey. I'll get that organised then. Cheers!

Diff.

Click to expand...

no probs.

Discovered oil in the wiring loom. Not really surprised. Going to have to replace the injector harness I guess.
Whats a good solvent for cleaning the ECU plug?

Painted my bonnet

one fecked uj guess what ill be doing soon !

my mig ran out of gas yesterday so ive had to order one which i can collect tomorrow, so today i decide to grease up the diffs.went to get the oil out of the shed to find it nearly empty then notice the front swevel balls were looking a bit weepy so cleaned them up and see how they go.checked steering ball joint some rubbers busted and others not to good,so these will need replacing and the car not even on the road yet

Got it's slave cylinder rod, made some progress on bumper for it and slam panel

robint said:

one fecked uj guess what ill be doing soon !

Click to expand...

inviting pikey over for a cuppa and sit there watching him do it for you

Realised I need to spend more money to get it done lol

Found low range wasnt working! so took the top cover off, wiggled it about abit, re-fitted it all and it works mint think the cover was on wrong

Removed my exhaust clamp that was rattling and also tightened the lower steering box bolt as it was nearly off :jaw: no wonder my steering was even floatier than normal.:crazy_driver:

Turned the fuel pump down on my defender 90 with 200tdi. Been smoking a bit under load and the guy who had it before me had turned up the pump to the max so got to the star wheel and put more tension on the spring to allow the turbo to wind up a bit more before the fuell is delivered.

Changed the fan belt which was wearing on one edge only to find the water pump needed replacing,then when putting new belt on after fitting new water pump found out the power steering pump is goosed as the shaft wandering in and out which I would imagine is the root cause of the belt wearing!!!!

got the gas bottled exchanged today now hoping for a descent weather tomorrow and get some welding done

Fitted more speakers

Got two 10" Infinity speakers mounted on the roof in the middle and now have two 4"" Edge speakers in place of the ****ty old LR ones!

put a new interior light in the roof consol the stood and looked at it cant drive my fender for a month gutted doctors orders....:frusty: