What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DaveM-sport said:
Yea, I made sure its upto the job before I cracked open the lid :)

Well... If it ever throws a leg out of bed, it'll look nice inside... Innit :p


Haha, nah... I cleaned off all the rough casting on the block etc and the paint is a good sealer and helps the flow of oil back to the sump, it has good insulating properties too so reduces the temps of the block and heat on external parts of the engine as also reduces the possibility of porous areas in the casting.

All pretty much irrelevant on an offroader other than maybe the oil draining back to the sump a fraction of a second quicker after I get put back on my wheels after being upside down... But every little helps and all that :)
Click to expand...

ok.:p:D
 
So this is the main body of the bumper and as its for my own vehicle its suitably bulky :rolleyes:




null_zps8fa697e0.jpg


null_zps442aa507.jpg


null_zps6b2f0161.jpg


null_zps28803ce7.jpg
 
Drained engine oil and coolant, removed fans, removed oil filter, oil cooler pipes, oil thermostat housing, rad hoses, radiator, expansion tank, grille, front panel etc.
Removed mounting brackets for expansion tank, PSF reservoir, radiator etc. and cleaned up for painting tomorrow.
Sprayed dinitrol into holes in chassis front crossmember and prepared outside for painting.
Despit being the longest day, it was very dull in the evening when I was doing this, not ideal for pics, will try and get some of the paint and rebuild tomorrow.
 
Painted my tow hook and bull bars as they were looking a little rusty. Whilst I was at it I also gave the rear cross member a coat. Wish I hadn't as the rest of the landy now looks like it also needs a coat of paint.
 
Welded in new engine mount and gearbox crossmember and fitted engine at last. All sitting nice and level and straight.

ImageUploadedByTapatalk1371923951.134905.jpg

ImageUploadedByTapatalk1371923967.165487.jpg

ImageUploadedByTapatalk1371923990.800131.jpg

Started a small fire inside the chassis and fixed the wee plate above gearbox crossmember.
 
Fitted new front o/s wing in prep for the paint job on it never again every nut and bolt seized plus my wiring loom to all the lights were a complete nest all sorted now though the rain never helped.
 
You must log in or register to reply here.

Similar threads

C
Freelander 1 crank no start
Replies
1
Views
677
niccage
N
1988smithy
Hill and Ditch 4x4 28th April 2024
2
Replies
29
Views
2K
kermit_rr
kermit_rr
F
Bang and a whir……
Replies
0
Views
236
FifiLander
F
jimmacD
P38 Nanocom neebie!
2
Replies
24
Views
915
Datatek
Datatek
R
Freelander 1 td4 fault codes
Replies
3
Views
253
GrumpyGel
GrumpyGel
Back
Top