chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
That's one major back step!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
That's one major back step!
the_wolf
Well-Known Member
- Posts
- 16,791
- Location
- Stonehouse, Scotland
Won some new doors for it off fleabay 
. I love a bargain me, two passenger push button doors and one drivers door all with glass and in repairable condition for the princely sum of £3.20!!
. I love a bargain me, two passenger push button doors and one drivers door all with glass and in repairable condition for the princely sum of £3.20!!At least I know that part of the Landy won't rust because I used good steel from a Vauxhall frontera
Last edited:
timtheenchanteruk
Well-Known Member
- Posts
- 4,633
- Location
- Leeds
Won some new doors for it off fleabay
Jammy sod!!!!!
Me, I got me decat pipe on
robint
Well-Known Member
- Posts
- 7,057
just sold pikeys 300 tdi engine but dont tell him !!!!
- Posts
- 67,745
- Location
- halfway between here and there.
robint
Well-Known Member
- Posts
- 7,057
- Posts
- 67,745
- Location
- halfway between here and there.
concal
New Member
- Posts
- 157
- Location
- chesterfield
Replaced reverse light switch woohoo now have a set of functioning reverse lights....so whilst on a roll cracked bleed nipples on steering box :doh::doh::doh::doh::doh::doh:forgot to turn engine off!!!!!!
Now the engine bay has had a steam clean power steering fluid replaced three jobs in one afternoon now that's productive.
Now the engine bay has had a steam clean power steering fluid replaced three jobs in one afternoon now that's productive.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
decided to clean up the chassis rails whilst the gearbox was out. What started a a couple of tiny holes. ended up like this.
No Clutch, Chassis rotten. :Cry: Am seriously thinking of ending it all..
And scrapping the fooker..
No Clutch, Chassis rotten. :Cry: Am seriously thinking of ending it all..
And scrapping the fooker..
- Posts
- 67,745
- Location
- halfway between here and there.
decided to clean up the chassis rails whilst the gearbox was out. What started a a couple of tiny holes. ended up like this.
No Clutch, Chassis rotten. :Cry: Am seriously thinking of ending it all..
And scrapping the fooker..
gotta be worth doing the welding though red.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
gotta be worth doing the welding though red.
Don't have much choice, can't afford to scrap it,
Just one thing after another. I knew it would need a new chassis when I bought it. But didn't realise it was gonna fall apart before I could afford to buy a replacement.
- Posts
- 67,745
- Location
- halfway between here and there.
Don't have much choice, can't afford to scrap it,
I knew it would need a new chassis when I bought it. But didn't realise it was gonna fall apart before I could afford to buy a replacement.
bugger,you have a welder though i take it??.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
robint
Well-Known Member
- Posts
- 7,057
Yes got a welder. Good job or I would be Fooked.
na ya wouldnt would of lent oops hired mine to you
- Posts
- 67,745
- Location
- halfway between here and there.
Yes got a welder. Good job or I would be Fooked.
good job then,so tis only labour and a few bits then to fix so not the end of the world really.
waldershelf
Well-Known Member
- Posts
- 2,397
- Location
- In the hills north west of Sheffield
Repainted my rear cross member and noticed a crack in the chassis coating just behind the rear offside bump stop. Cut out the rot, welded in a new piece, painted and waxoyled it.
I'm a bit ****ed off about finding more rot, in the summer of 2011 I went over the chassis with a fine tooth comb and repaired every bit of corrosion I could find. I then painted the outside with high zinc paint and waxoyled the chassis inside and out.
The paint and waxoyl on the outside still seems to be ok I think it has just rotted through from the inside despite the gallon of waxoyl that went in there .
Apologies for the photographic quality the camera on my phone is not very good.
I'm a bit ****ed off about finding more rot, in the summer of 2011 I went over the chassis with a fine tooth comb and repaired every bit of corrosion I could find. I then painted the outside with high zinc paint and waxoyled the chassis inside and out.
The paint and waxoyl on the outside still seems to be ok I think it has just rotted through from the inside despite the gallon of waxoyl that went in there .
Apologies for the photographic quality the camera on my phone is not very good.
Attachments
Last edited:
ebbadger
Well-Known Member
- Posts
- 1,518
- Location
- Twickenham, Middlesex
Decent evenings work......
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
Last edited:
firepower
New Member
- Posts
- 450
- Location
- 29 Palms California.
Pressure washed the thing. This has made sure that I can clearly see the rusty bits and holes (air conditioning) in the arches. Pressure washers should be fecking banned
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Decent evenings work......
rear end virtually finished....
rear diff pan refitted and sealed....
new cylinders, shoes n drums...
new rear brake lines made and fitted.....
Tommorow see's more work with a tin of black hammerite and a wire wheel..... its gonna be a long haul.....
cheers steve
Ooo shiny
