What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Today fitted the piece of electronic kit produced by member David Pye that lets me raise and lower the rear air suspension at the flick of a switch. Great for loading heavy items. Works a treat.

Also finally sealing up the front sunroof after trying all the solutions to fix it. Given it up as a bad job and a waste of time.

Sunroof will poss be my next job what u seal it with ? .... Have some new gas struts and rear pads and discs to fitted in the morning
 
Changed gearbox oil so see if it would sort out the gear stick feeling like I'm stirring thick treacle when it's warm, it's better but not completely cured. Idk what it is.

Found a leak or two while underneath too!

Leaky diff, any ideas if this is a simple fix or a sign that a big jobs needs to break out?
 

Attachments

  • ImageUploadedByTapatalk HD1360944558.437968.jpg
    ImageUploadedByTapatalk HD1360944558.437968.jpg
    51.5 KB · Views: 136
  • ImageUploadedByTapatalk HD1360944572.184482.jpg
    ImageUploadedByTapatalk HD1360944572.184482.jpg
    63 KB · Views: 153
Swapped the speedo so i have a working speedo :D

Fixed the temperature gauge so now it works :D:D

Replaced some bulbs so now I can see the new speed and the fixed temperature gauge at night.

An hour well spent.
 
Last drive for a wile today... gone in for a new head gasket... or possibly head :( See what he finds ? !!

Just had an up date.... head gasket has blown.. but there is a corrosion pocket in the head face, were the water jacket from the block meets the head (no cross over to the head at this point). So will drag the spare out of the shed tomorrow and have a shufty at that... get it cleaned up and take it over to the man.
 
Got the gearbox and then transfer box back in today. So much easier in two parts. uploadfromtaptalk1360963463831.jpg

Filled with oil and fired up the engine and tried all gears and all works great, zero whine now but there's no load as yet to put the prop's back on.
Very stiff to change gears but I'm sure they'll loosen up ;)
 
Moved the new gearbox out of the car and into the storeroom


input shaft wants a little rub down and lick of paint but thats it :)

gonna coat the rest too though just because theres a little surface rust forming
 
Back
Top