Disco TD5
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Disco TD5
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Ordered belts, service kit, tiger seal, heat resistant spray, black spray paint, bearings
That is all
That is all
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Cleaned up and painted a little Vapormatic towpin fitting,ready to fix on the rear xmember just in case I need to tow anyone in the predicted ice!
Riksbar
New Member
- Posts
- 9
- Location
- Burnley - where the sun don't shine,
Just bought a set of new high back 2nd row seat to strap the kids to the Defender.
mark-d
Well-Known Member
- Posts
- 1,107
- Location
- Netherlands
Wired my glow plugs in as it's getting chilly
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Bought a serpentine belt, and me noo tensioner bearing has arrived.
also bought 2 digital voltage meters. Which I'm gonna make an housing for. So I can track the voltage on me batteries. Ammeter next on the list.
also bought 2 digital voltage meters. Which I'm gonna make an housing for. So I can track the voltage on me batteries. Ammeter next on the list.
qubec45
Member
- Posts
- 29
- Location
- nr andover middle of no where
fitted a new brownchurch bull bar to the front so my cows dont knock of any more lights on it !
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Got any pics? We likes the piccies
- Posts
- 14,902
- Location
- Doncaster
Added a dash of oil, checked filters, fluid levels, prepped the caravan, getting ready to set off to castleton for the weekend with the missus.
Hopefully she's returning home Sunday and I'm staying till Tuesday ..
Hopefully she's returning home Sunday and I'm staying till Tuesday ..
Tried to repair one of my break lights, then the fuse blew and stopped play. Don't have another fuse to hand, so I have no break lights instead of 1
I got told it was an earthing problem from someone who saw what they were doing, apparently when I had my lights on and pressed down on the breaks by right hand light (as you look at the back) went out completely. Anyone know where the problem may be?
Is it on the light its self or somewhere along the wiring loom
I got told it was an earthing problem from someone who saw what they were doing, apparently when I had my lights on and pressed down on the breaks by right hand light (as you look at the back) went out completely. Anyone know where the problem may be?
Is it on the light its self or somewhere along the wiring loom
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Tried to repair one of my break lights, then the fuse blew and stopped play. Don't have another fuse to hand, so I have no break lights instead of 1
I got told it was an earthing problem from someone who saw what they were doing, apparently when I had my lights on and pressed down on the breaks by right hand light (as you look at the back) went out completely. Anyone know where the problem may be?
Is it on the light its self or somewhere along the wiring loom
when the lights are off..
get a multi meter and test the live wire that goes to the bulb with the red probe for 12v dc 1st... and the black to earth, then if no voltage turn it to ohms and see if it shows any resistance, if it does remove the other break bulb/bulbs and try again, if it still shows a resistance there is probably a short
drewster
Well-Known Member
- Posts
- 2,997
- Location
- new milton hampshire
Getting a bit ****ed off with my 90 so far this week I have replaced 2 cv joints 1front stub axle 1 power steering pump
And now I need a new timing case as the pulley bearing is not available
At this rate I will be skint for Christmas
And now I need a new timing case as the pulley bearing is not available
At this rate I will be skint for Christmas
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
drewster
Well-Known Member
- Posts
- 2,997
- Location
- new milton hampshire
Look at it positive........... early presents
Lol that's one way to think of it
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
and a safe vehicle to take your family out. Just tell them you did 1 big family present and enjoy
Cheers for that. Found out it was a loose bulb, but when I went and replaced the cover it went out, so did the front side light on that side. Now non of them come on, checked the fuse box and noticed the other side lights had a loose connection and were turning on and off when I move it, but still nothing for the right hand side. gone from having lights but no brake light, to no light at the rear... to no light at front and rear. What is going on!?
Had it working for 2 bloody seconds and now its fooked. Supposed to be towing a trailer load of staging tomz at 4:30 in the morning, thats not gonna happen now
Cheers for that. Found out it was a loose bulb, but when I went and replaced the cover it went out, so did the front side light on that side. Now non of them come on, checked the fuse box and noticed the other side lights had a loose connection and were turning on and off when I move it, but still nothing for the right hand side. gone from having lights but no brake light, to no light at the rear... to no light at front and rear. What is going on!?
Had it working for 2 bloody seconds and now its fooked. Supposed to be towing a trailer load of staging tomz at 4:30 in the morning, thats not gonna happen now
Oh, and I tried a multi meter across the fuse terminals and there was nothing, so no power is reaching the fuse box by the looks of it
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Check both sides of fule holes with the red probe and black on the earth say a bolt or somthing on the dc volt setting
