What have you done to your Landie today.

removed the top off my snorkel and had to recover it from middle of the Dorset undergrowth, oh well all in the name of seeking chippies

Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.

Good job the weather is going to be fine

mine has spent the day being thrashed around yarwell off road quarry

welded the side tubes onto the roll cage, to save the roof over the doors (should of been done 12 months ago bit of a shutting the stable door after the nag has fooked off )

discomark10 said:

what make was it... britpart by any chance?

Click to expand...

Lol. No idea. No labels or stamps on it? Hopefully this one will last longer. I think the seal behind the passenger side vent is damaged and water maybe getting into the motor. I never use the vents so will probably seal em up permanently to be safe.

fitted decent seats and made the brackets for the middle seat after some carefull setting out with a coco-pops box

and fitted the fully reconditioned fuel dist pump ready for tomorows fun and games bleeding it up ( hopefully itll be 3rd time lucky )

and wired a new numberplate light on the arse end aswell as fitted a new temp sender unit

and couldnt resist fitting a brand new transfer box lever rubber boot

and then took ownership of a pair of 6" speakers that one of the neighbours was throwing out ( house speakers left for the bin men )

gonna get some more chipboard out in the morning and fortify the rear wheel arches in the tub and maybee concoct some sort of housings for the speakers :smokin:

Drove it on a landing craft, went to a small island and took it shooting ...

owen h r said:

drove it on a landing craft, went to a small island and took it shooting ...

Click to expand...

that sounds like a great weekend!!

landowner said:

Disco was tramlining on motorway after fitting new tyres so had a look at it when I got home.
It's been getting vague on the steering for a while come to think of it, anyway I found loads of play in the swivel bearings so will have to do both sides this week.

Good job the weather is going to be fine

Click to expand...

Found I have the same problem Is it a tough job? Maybe leave it to a professional??

're-profiled the year bumper so it now catches on the spare wheel when I open the door.
I also slightly 're-profiled the drivers door

Got the good looking mechanic on it today. New suspension all fitted.

Dr No said:

Found I have the same problem Is it a tough job? Maybe leave it to a professional??

Click to expand...

Swivel pins and bearings took me a day on my Fender which included fitting new wheel bearings ... not a bad job but quite greasy

Finally got the rev counter fitted and working

Daz

Done nothing cos it's tipping it down was ginna try n take prop off n try n sort clutch problem out with craigyb

Wired in the massive winch isolation switch and 10mm eye crimps on the battery leads for battery terminal connectors with posts

Daz

Ordered front prop UJs, A Front Diff, A VCU, a drag link assy, A track rod assy and a steering damper.

threatened to beat it with large stick basil faulty style

baggyjim said:

threatened to beat it with large stick basil faulty style

Click to expand...

http://www.youtube.com/watch?v=78b67l_yxUc:D:D

Wiganerdan said:

Ordered front prop UJs, A Front Diff, A VCU, a drag link assy, A track rod assy and a steering damper.

Click to expand...

hi WD,what part of wigan are you from??.

I'm from Hindley.