What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Fitted me Adjustable panhard rod. Tracking is all over the show now though. getting that done tuesday.

Now im writing up my electrical specs to send to the mad hat man.
 
it wont be your tracking thats out but your drag link and steering center

Oh right.

Took it to a garage this afternoon as the steering wheel is obviously now not straight. They said take steering wheel off and centre it and they will sort the tracking on tuesday.

So how do i adjust the drag link?

Iam hitting the radius arms on left full lock. :confused:
 
My dad welded a small bracket for the front disc dust shield. ****part ones don't fit, had to cut away most of it :rolleyes: Then took it for a good run to let the brakes bed in :) a few more miles and they will be spot on, they already bite better than the old ones :D
 
silicone hoses all round.... egr removed..... intercooler cleaned....itg air filter....decat and middle removed....new back box....new boost controller and a fookin shock in how better she drives WOW! just wana boot it to hear engine lol
 
Moved the middle seat's, filled her to the brim with scrap for my neighbour so he could clear his garden ... happy neighbour, cash in pocket ... job done :)
 
Thanks :D

426269_2840557574028_1261954005_32238531_1620695591_n.jpg


This is what the back looks like also :)

Looks very nice but TTTOOOOOOO!!! Clean.
 
Ordered two new window seals to try and atleast slow down the constant stream of water into the footwells.

And two diff pinion oil seals to try and slow down the oil leaks from the diff.
I put tow new seals in 6mnths ago, however they came in a blue packet, with blue writing on!!
So ive gone for some different ones this time, see if they last any longer, i feel though it may be down to my 2" lift without corrected arms front or back.
 
Ordered two new window seals to try and atleast slow down the constant stream of water into the footwells.

And two diff pinion oil seals to try and slow down the oil leaks from the diff.
I put tow new seals in 6mnths ago, however they came in a blue packet, with blue writing on!!
So ive gone for some different ones this time, see if they last any longer, i feel though it may be down to my 2" lift without corrected arms front or back.

Im having vibration issues because OF the castor correct arms. Having done my research it was 50/50 as to wether id get prop vibration.

And my luck didnt hold. Its not bad, just a tad annoying when slowing down.

Double cardan and a wide angle it is then! :doh:

It is a TD5 though. May not be so bad on earlier models.

Trewey was right. Lifting your landy can cause other issues.
 
Im having vibration issues because OF the castor correct arms. Having done my research it was 50/50 as to wether id get prop vibration.

And my luck didnt hold. Its not bad, just a tad annoying when slowing down.

Double cardan and a wide angle it is then! :doh:

It is a TD5 though. May not be so bad on earlier models.

Trewey was right. Lifting your landy can cause other issues.

Well he has been around since the series one rolled off the line at solihull so I suppose he should know his **** when it comes to landys :p
 
Im having vibration issues because OF the castor correct arms. Having done my research it was 50/50 as to wether id get prop vibration.

And my luck didnt hold. Its not bad, just a tad annoying when slowing down.

Double cardan and a wide angle it is then! :doh:

It is a TD5 though. May not be so bad on earlier models.

Trewey was right. Lifting your landy can cause other issues.


got wide angle prop on front. But not rear.
and no correction anywhere, i think to be honnest the cost a time of replacing a diff seal every 6mnths out weighs the cost of castor correction and perhaps introducing this vibration your seeing...
 
Back
Top