What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Fitted a new radio in mine, sounds very nice now, although I think i will replace a pair of the speakers at some point, and perhaps but a small sub in somewhere hidden to make it sound nice :)

Used the tools in the back of mine to fit a pair of speakers in a mates car. Soldering and heat shrinking like a pro ;)
 
ImageUploadedByTapatalk1376776786.216135.jpg
Look familiar?
 
I've done a bit more wiring on mine. I've put the new fusebox in behind the driver's seat and run a new live feed from the battery box. I've also given it its own fuse inside the battery box in case it chafes on anything on its journey from one side of the Land Rover to the other. I've not posted a picture because I need a few P clips on the cables to make it look neat enough to expose to you lot. After payday I'll get an inverter and then we'll be more or less self sufficient as far as electricity is concerned.
 
Brown said:
I've done a bit more wiring on mine. I've put the new fusebox in behind the driver's seat and run a new live feed from the battery box. I've also given it its own fuse inside the battery box in case it chafes on anything on its journey from one side of the Land Rover to the other. I've not posted a picture because I need a few P clips on the cables to make it look neat enough to expose to you lot. After payday I'll get an inverter and then we'll be more or less self sufficient as far as electricity is concerned.
Click to expand...

pity you dont live nearer to me,you could come and fit my nooo gauges for me,i know how to do them,thats the easy bit.physically it aint so easy.:eek::mad:
 
It tried to kill me on motorway-situation normal

some slack in wheel bearing to tighten up for starters
 
Continued to work on TDI conversion. On a massive learning curve. Feeling like I may have bitten off more than I can chew. Decided to strip engine bay to chassis and underseal and paint everything. Want to do a proper job! I ache lots tonight, sometimes those bolts that have been tight for 26 or so years are a bit of a challenge, need a bigger breaker bar!!!!! Could do with some motivational responses, or some humorous, sarcastic, or down right rude ones. Help? Ta
 
RealSillyTilly said:
Continued to work on TDI conversion. On a massive learning curve. Feeling like I may have bitten off more than I can chew. Decided to strip engine bay to chassis and underseal and paint everything. Want to do a proper job! I ache lots tonight, sometimes those bolts that have been tight for 26 or so years are a bit of a challenge, need a bigger breaker bar!!!!! Could do with some motivational responses, or some humorous, sarcastic, or down right rude ones. Help? Ta
Click to expand...

ya wimp,put ya back into it.oh you have.oops.:p:p:D:D
 
You must log in or register to reply here.

Similar threads

C
Freelander 1 crank no start
Replies
0
Views
430
chazy
C
1988smithy
Hill and Ditch 4x4 28th April 2024
2
Replies
29
Views
1K
kermit_rr
kermit_rr
Dabbster
L320 2.7 Fuel fault
Replies
4
Views
522
Dabbster
Dabbster
S
Bulkhead swap 300TDi Defender
Replies
15
Views
2K
trax99
trax99
F
freelander td4 2002 steering shake when going uphill?
Replies
9
Views
517
hd3
hd3
Back
Top