What have you done to your Landie today.

the_wolf · Jun 1, 2013

Fitted new panhard rod bushes with the help of a furnace, vice and a large hammer. Rest in peace my mates vice, ye served us well the time we knew ye.

Tried once again to fix the gash in front of my diff casing, think I was actually successful this time.

And stuck some Wynns injector cleaner in it in the hope it'll sort it out a bit. It bloody better for 16 quid a bottle.

baggyjim · Jun 1, 2013

drove mine to the garage for MOT , clean bill of health , so ok for another year

Mark L · Jun 1, 2013

Whipped out rear diff to get it cleaned up and reconditioned before it gets re-homed in the new axle casing.
Now running around in diff lock.

suew · Jun 1, 2013

Thinking of something I can improve on the Landy which I wont f**k up

I am so bored, horses are done, daughters house is finished, kitchen wall is down and I don't have any plasterboard to finish the job. I have even done the washing and cleaning.

I hate being on leave, it doesn't leave you any jobs to do for the weekend

Dr_evil · Jun 1, 2013

suew said:
Thinking of something I can improve on the Landy which I wont f**k up

I am so bored, horses are done, daughters house is finished, kitchen wall is down and I don't have any plasterboard to finish the job. I have even done the washing and cleaning.

I hate being on leave, it doesn't leave you any jobs to do for the weekend

Silicone hoses

cant #### them up or fitting a swingaway wheel carrier

suew · Jun 1, 2013

Dr_evil said:
Silicone hoses cant #### them up or fitting a swingaway wheel carrier

The first I dont know what it is, therefore I could definitely f**k it up. The second I don't have and don't need, but could probably f**k that up too

Something like seat covers or stickers, or even paint perhaps. I don't have any of those things either.

Only thing I actually have is the cubby box which isn't fastened down yet. But the cup holders work very well without.

Dr_evil · Jun 1, 2013

suew said:
The first I dont know what it is, therefore I could definitely f**k it up. The second I don't have and don't need, but could probably f**k that up too

Something like seat covers or stickers, or even paint perhaps. I don't have any of those things either.

Only thing I actually have is the cubby box which isn't fastened down yet. But the cup holders work very well without.

Silicone intercooler hoses, not needed but a nice colourful upgrade from the standard ones if they're on the way out and only a few quid more

Just undo jubilee clips and match the pipes, only 3 and all different sizes so you cant mess them up

MPfive · Jun 1, 2013

Changed wheel bearings on passenger front as it colapsed yesterday. Took it out for a test drive and noticed a front prop uj gone. Seems like my disco going though a rough patch

THEengineer · Jun 1, 2013

suew said:
The first I dont know what it is, therefore I could definitely f**k it up. The second I don't have and don't need, but could probably f**k that up too

Something like seat covers or stickers, or even paint perhaps. I don't have any of those things either.

Only thing I actually have is the cubby box which isn't fastened down yet. But the cup holders work very well without.

you could come and work on mine
the steering box needs changing
all fluids changing
new doors fitted
new seals fitted
cv needs changing
a frame ball joint needs changing
new floor fitted
new oil seals needed
outrigger needs welding
should keep you from being board for a while

defender11069 · Jun 1, 2013

Broke it see lzir

ratty · Jun 1, 2013

suew said:
Thinking of something I can improve on the Landy which I wont f**k up

I am so bored, horses are done, daughters house is finished, kitchen wall is down and I don't have any plasterboard to finish the job. I have even done the washing and cleaning.

I hate being on leave, it doesn't leave you any jobs to do for the weekend

lick of paint on the chassis?

suew · Jun 1, 2013

ratty said:
lick of paint on the chassis?

Not a bad idea

But its dark now

ratty · Jun 1, 2013

suew said:
Not a bad idea

But its dark now

Any bloody egg-scuse

ratty · Jun 1, 2013

Just some pics of yesterdays exertions

First off pimping my new to me (but old) tow pole ( I shoulda taken a picky of it before cos it was rusty as hell). It's not the straightest in the world by ok as a spare for occasional use.

After the respray....

And after making it a bit more visible.....

And secondly (although not too easy to spot) the new front wheel bearings, discs, pads and calipers.

aaronmorris · Jun 2, 2013

Carried on taking it to bits.

blue beasty · Jun 2, 2013

Washed, rubbed down and started giving it a lick of paint.....

Might do the Landy tomorrow

howardo · Jun 2, 2013

blue beasty said:
Washed, rubbed down and started giving it a lick

Might do the Landy tomorrow

you must really like your landy

Ttuck3r · Jun 2, 2013

New windscreen fitted and new genuine LR spot lights.

rangy35 · Jun 2, 2013

ratty said:
Just some pics of yesterdays exertions

First off pimping my new to me (but old) tow pole ( I shoulda taken a picky of it before cos it was rusty as hell). It's not the straightest in the world by ok as a spare for occasional use.

After the respray....

And after making it a bit more visible.....

And secondly (although not too easy to spot) the new front wheel bearings, discs, pads and calipers.

Hmmmmm.......like your wheels/rim's where did you get those from please?

Pikey · Jun 2, 2013

Fitted me noo recovery Eye. From PressBrake.

What have you done to your Landie today.

Well-Known Member

New Member

Well-Known Member

Well-Known Member

Banned

Well-Known Member

Banned

Active Member

whatever

AKA Mr cool...

I'm not special I'm limited edition

Well-Known Member

I'm not special I'm limited edition

I'm not special I'm limited edition

Head's a shed

Attachments

Leaks an prone to bits dropping off

New Member

Active Member

Attachments

New Member

Dummy Ejection Facilitator..

Similar threads