WhiskyLassie
Well-Known Member
- Posts
- 5,665
- Location
- Uk
Bought it a sister. But getting a new subframe on the original Tuesday.
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 5
- Location
- Larkhall
Probably a m8 bolt 10.9 grade
freelounger
Member
- Posts
- 35
- Location
- West Wales
Replaced the dodgey seatbelt for the Driver position
Cut down the cage and re-fitted it
Cut down the cage and re-fitted it
kernowsvenski
Well-Known Member
- Posts
- 1,905
- Location
- Truro
Kerlaan
Active Member
- Posts
- 189
- Location
- Bretagne, France
Which disk manufacturer @kernowsvenski and can you feel a difference?
freelounger
Member
- Posts
- 35
- Location
- West Wales
eBay item 234968274920
We've all got them!
They had a £10 discount token when I bought mine.
andyfreelandy
Well-Known Member
- Posts
- 6,092
- Location
- Devon
Pure magic
- Posts
- 4,772
- Location
- Near Heathrow.
Took wife's 2005 FL1 for MOT today. Passed with no advisories !!
kernowsvenski
Well-Known Member
- Posts
- 1,905
- Location
- Truro
As shared, but a link is here;
FRONT DRILLED GROOVED 277MM BRAKE DISCS FOR LAND ROVER FREELANDER 1 L314 98-06 | eBay UK
Specifications: ---Solid/Vented: Vented ---Disc Diameter: 277mm ---Overall Depth: 51mm ---Hub Centre Diameter: 66mm ---Disc Thickness Max: 21mm ---Disc Thickness Min: 18mm Features: ---Direct replacement for original discs ---Black phosphate coating on non-friction areas reduces corrosion...
www.ebay.co.uk
Mine are still bedding in so will report back.
Rank Amatuer
Well-Known Member
- Posts
- 5,345
- Location
- Scotland
Finally got round to replacing the crank position sensor. The car had only failed to start twice these past couple of months but the crank sensor seemed to be the most likely culprit. Only time will tell.
Easy job, took less than an hour.
Easy job, took less than an hour.
I have a spare one in my glove box, with an 8mm socket, just in case!
If pushed, you can change it at the roadside (so I’m told
)FrINlander
Member
- Posts
- 45
- Location
- Finland
Replaced the front RH ABS sensor. Wasn't as easy as I thought and I succeeded in breaking one of the wheel well covers pins. I hate plastic pins.
Yes, done it in a layby on the A30, with my feet sticking out towards the nearside carriageway.I have a spare one in my glove box, with an 8mm socket, just in case!
If pushed, you can change it at the roadside (so I’m told
Oh, from memory it's a 10mm spanner needed, not an 8mm. Keep both sizes handy, just in case.
andyfreelandy
Well-Known Member
- Posts
- 6,092
- Location
- Devon
They look upside down to me.
Similar threads
Freelander 2 (LR2)
Freelander 2 Judder when first set off - Stops after about half a mile.
