What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Nodge68 said:
If the ATF-U is coming from the supplier I linked, then you'll have that before Friday.

I've just placed a £170 order for the parts needed to do my FL2 cylinder head change. :)
Click to expand...
Have you been keeping a tally on costs and hours spent? It'll be interesting to see how well your efforts have stacked up once you're up and running properly
 
Fuel pressure sensor harness changed in the hope that it cures the rough idle at start up, particularly in the mornings. I'm not convinced but in playing about with the RonBox today (which is normally off due to it making the engine noisy and smokey) I've noticed hardly any black smoke now when accelerating hard. That's one bonus. Probably should have changed the harness a long time ago!
Fingers crossed that it sorts the wobbly idle as my next point of investigation will probably be the injectors. :confused:
 
kernowsvenski said:
Fuel pressure sensor harness changed in the hope that it cures the rough idle at start up, particularly in the mornings. I'm not convinced but in playing about with the RonBox today (which is normally off due to it making the engine noisy and smokey) I've noticed hardly any black smoke now when accelerating hard. That's one bonus. Probably should have changed the harness a long time ago!
Fingers crossed that it sorts the wobbly idle as my next point of investigation will probably be the injectors. :confused:
Click to expand...

Let me know if it helps with the rough starts
 
andyfreelandy said:
Found a fuel station with fuel so put some in. Not too much mind you!!!
Click to expand...
I visited 5 petrol stations between St Ives and Fraddon in the small hours of Tuesday morning, and all were out of fuel.
Strangely the cheap petrol station in St Austell had petrol and diesel on Tuesday morning at 8am, and no queue to get in either, very odd.
 
Replaced all the vacuum hoses that I had already replaced with rubber and cotton covered (which went porous) with 3.2mm silicone vacuum pipe. 2m did all the cotton hoses and cost about £6.
Hopefully brakes and power will now stay working as they should!
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
534
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
257
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
281
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
496
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
602
pauld2296
P
Back
Top