What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Today's job was to start preparing the old girl for its MOT. I mopped off the headlights that have begun to fog over again.

I also started tackling a few areas of corrosion on the underside.
I also found that the brake pipes are past there best, so these will need replacement.
 
Nodge68 said:
Today's job was to start preparing the old girl for its MOT. I mopped off the headlights that have begun to fog over again.

I also started tackling a few areas of corrosion on the underside.
I also found that the brake pipes are past there best, so these will need replacement.
Click to expand...
I used T Cut on my headlights a while ago which brought them up well but like yours they fogged over again. Has anyone here ever tried to lacquer them after cleaning up? I've seen guys doing that on Youtube but you never hear how successful it is long term.
 
Alibro said:
I used T Cut on my headlights a while ago which brought them up well but like yours they fogged over again. Has anyone here ever tried to lacquer them after cleaning up? I've seen guys doing that on Youtube but you never hear how successful it is long term.
Click to expand...

I can't see lacquer lasting tbh. I'm going to keep mine polished religiously this time. I mopped them off with Meguiar's restoration kit. I then polished them with Autoglym Super Resin Polish. This made them glissen very nicely. I do have some minor fogging on the inside, which is a pain. I'm thinking about fitting some type of DRL to mine. So I'll clean the inner glass surface then.
I'll see how the polish keeps it clean until that point.
Before the mop and polish.
20170902_124536.jpg


After the mop and polish.
20170902_124541.jpg
 
This morning I've ordered a pair of rear flexi brake hoses for my up coming rear brake line replacement operation. I'm replacing the entire rear line assembly from the modulator to the wheel cylinders.
 
Nodge68 said:
I can't see lacquer lasting tbh. I'm going to keep mine polished religiously this time. I mopped them off with Meguiar's restoration kit. I then polished them with Autoglym Super Resin Polish. This made them glissen very nicely. I do have some minor fogging on the inside, which is a pain. I'm thinking about fitting some type of DRL to mine. So I'll clean the inner glass surface then.
I'll see how the polish keeps it clean until that point.
Before the mop and polish.View attachment 130667

After the mop and polish.View attachment 130668
Click to expand...
Like you say I'd be concerned the lacquer wouldn't last any better and might stop you being able to clean it up again.
 
Nodge68 said:
This morning I've ordered a pair of rear flexi brake hoses for my up coming rear brake line replacement operation. I'm replacing the entire rear line assembly from the modulator to the wheel cylinders.
Click to expand...
Last time I replaced brake pipes on my MGF I lifted the old ones out of the engine bay but didn't notice a couple of drips. next day the boot lid had a couple of pretty little blisters right in the middle. :eek:
Grrrrrr :mad:
 
Alibro said:
Like you say I'd be concerned the lacquer wouldn't last any better and might stop you being able to clean it up again.
Click to expand...
My thoughts too. If they fog after lacquer is applied. The lacquer will need removing before the polycarbonate can be polished again.
 
Alibro said:
Last time I replaced brake pipes on my MGF I lifted the old ones out of the engine bay but didn't notice a couple of drips. next day the boot lid had a couple of pretty little blisters right in the middle. :eek:
Grrrrrr :mad:
Click to expand...

The trick is to cut the pipes with a pair of side cutters, if the pipes are in a sensitive area. This then seals the pipes up, containing any fluid within.

The fuel tank on the FL needs to be dropped to get the LH rear pipe out. I'm thinking I'll just cut the old pipe out of circuit and fit a new length with a joint on the RH side of the tank. So I'll effectively make the LH pipe in two sections. That's the plan anyway.
 
Nodge68 said:
The trick is to cut the pipes with a pair of side cutters, if the pipes are in a sensitive area. This then seals the pipes up, containing any fluid within.

The fuel tank on the FL needs to be dropped to get the LH rear pipe out. I'm thinking I'll just cut the old pipe out of circuit and fit a new length with a joint on the RH side of the tank. So I'll effectively make the LH pipe in two sections. That's the plan anyway.
Click to expand...
I don't like hidden brake pipes. We have an old horse lorry which was prepped by a local mechanic and brought in for MOT. During the MOT test a hidden brake pipe burst leaving the thing stranded with a securing order on it so it could only be towed away. :mad:
Although the whole episode cost us a few hundred quid it could have been a hell of a lot worse. If the brakes had failed while my wife was driving it God knows what might have happened.
You could even say that the MOT guys may have saved the lives of my my wife and daughter.
 
Alibro said:
I don't like hidden brake pipes. We have an old horse lorry which was prepped by a local mechanic and brought in for MOT. During the MOT test a hidden brake pipe burst leaving the thing stranded with a securing order on it so it could only be towed away. :mad:
Although the whole episode cost us a few hundred quid it could have been a hell of a lot worse. If the brakes had failed while my wife was driving it God knows what might have happened.
You could even say that the MOT guys may have saved the lives of my my wife and daughter.
Click to expand...

I had a similar hidden brake pipe episode on my D3. The wife was driving it and mentioned that the brakes felt strange. She then popped out in it and the brakes failed just as she arrived back home. Luckily some quick thinking, using the EPB, stopped her from demolishing my garage with it!! The pipe that is hidden by the rear diff and EPB module had rusted right through!! Rather annoying and hugely dangerous, considering the D3 was just 9 years old at the time.
 
jake61 said:
Fitted four Event All Terrain tyres. Much cheapness, but I will be spending the winter up and down to a wind farm, so we'll see how they do.
Click to expand...
I stuck some zeta ztr20 tyres on which were so cheap for a set. They've been marvelous and have outlasted the premium brand and still look brand new, and they grip. Not all cheap tyres are useless.
Mike
 
Skinny Mike said:
I stuck some zeta ztr20 tyres on which were so cheap for a set. They've been marvelous and have outlasted the premium brand and still look brand new, and they grip. Not all cheap tyres are useless.
Mike
Click to expand...

My son was able to do me a good price, (he's in the trade), but reckoned they were pretty good and at half the price of BFG and looking just the same, it was a shame not to.
They will be worked hard through the winter at around 2500 feet, so it will be interesting to see how they perform.
 
Over the weekend I stripped down my KV6 to get at some noisy tappets on the L/H bank. What a procedure! It certainly isn`t a simple engine.
The replacement tappets, seals, gaskets etc. aren`t expensive but unfortunately I damaged the end of the intake cam getting the pulleys off and that will cost me more than all the
other parts combined to replace. :(
 
Rich in Vancouver said:
Over the weekend I stripped down my KV6 to get at some noisy tappets on the L/H bank. What a procedure! It certainly isn`t a simple engine.
The replacement tappets, seals, gaskets etc. aren`t expensive but unfortunately I damaged the end of the intake cam getting the pulleys off and that will cost me more than all the
other parts combined to replace. :(
Click to expand...

How did you damage a camshaft removing the pulleys?
 
You must log in or register to reply here.

Similar threads

B
Freelander 1 Freelander prop bearings replacement td4
Replies
15
Views
541
andyfreelandy
andyfreelandy
O
Freelander 2 diff removal
Replies
7
Views
270
Nodge68
Nodge68
andyfreelandy
Other New Project starting today
Replies
3
Views
288
Alibro
Alibro
P
2006 Facelift TD4 Auto turbo vacuum boost solenoid
Replies
11
Views
504
andyfreelandy
andyfreelandy
P
Freelander 2 4wd problems
Replies
3
Views
621
pauld2296
P
Back
Top