what have people payed

300tdistu · Nov 18, 2009

what have u payed to have a new clutch fitted, my clutch went on sunday and iv put it in to my landy man and he wants £330 job done. i think is an ok price, i trust the fella, done work before and all fine... but a pal said i should be more like £250,

is £330 to much or bout right ??????????????????????????

oil dripper · Nov 18, 2009

mates just paid 300quid(more fool him) to have one in his 90 but it does come with 2 year warrenty.

300tdistu · Nov 18, 2009

its a 200tdi disco, £200 labour and £130 fro clutch

oil dripper · Nov 18, 2009

yer can gerra borg and beck clutch kit from MM4x4 for about 70 quid and that comes witha new fork

lerk · Nov 18, 2009

Mates just got a price of £180 - including B&B Clutch for a 300, but he's got to get it done before friday morning cos the guy who's going to do it for him gets sent down for 7 years...
Normal price should be somewhere between myy price and yours!

andyb66 · Nov 18, 2009

I would say about £300 for a 3-part clutch and a new HD release arm. You have to remember that there is a little more work with a Discovery if you remove the box as the centre console has to come out. Not like a Defender floor which takes about 15 minutes with air tools

300tdistu · Nov 18, 2009

iv spent today 370

= clutch kit, weld clutch fork, longer bolts in gearbox mount, second hand alternator, alternator belt and fan belt. sounds loads better now no gear box rattles or anything

happy for now lol

nickh75 · Nov 19, 2009

mine cost me 70 quid and i fitted it on my own,
i was fooked after but what will be will be

oldzed · Nov 19, 2009

nickh75 said:
mine cost me 70 quid and i fitted it on my own,
i was fooked after but what will be will be

Good on yer fella, that is definitely a 3 shredded wheat job, did you have 4 hands on the box to put it back in. ?

Taffy · Nov 21, 2009

i paid 380 quids for my clutch did not have garage or equipment but now have a big garage. and tools it is about 65n to 70 quids for cluth kit and hire a crane and u can do it yerself quite easy. if u have mate who helps u forget crane use jack with block of wood carefully drag back the gearboc on jack etc big jack etc otherwise use crane and go inside the landy and chain round the gearboc and u can do it single handed.

what have people payed

300tdistu

Well-Known Member

oil dripper

Well-Known Member

300tdistu

Well-Known Member

oil dripper

Well-Known Member

lerk

New Member

andyb66

Well-Known Member

300tdistu

Well-Known Member

nickh75

Well-Known Member

oldzed

New Member

Taffy

Active Member

Similar threads