Took me longer to design, print, redesign, reprint, modify than it would have to change the whole linkage
Ah but do you have a linkage to hand
.Looks like another temp repair that will need sorting in 10yrs time
.J
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Ah but do you have a linkage to hand
.Looks like another temp repair that will need sorting in 10yrs time
.J
- Posts
- 5,712
- Location
- North Manchester
Bugger I knew there was something I forgot to order, still as you say I've got 10 yearsAh but do you have a linkage to hand
Looks like another temp repair that will need sorting in 10yrs time
J
- Posts
- 31,478
- Location
- North Shropshire
by the time you need it, they'll have stopped producing themBugger I knew there was something I forgot to order, still as you say I've got 10 years
- Posts
- 31,478
- Location
- North Shropshire
Anyone know if it's possible to adjust/bias mpg display on the l322? Mine is over 20% optimistic. It's a bit silly
- Posts
- 4,464
- Location
- Rotherham
last longer than the proper Land Rover job thenAh but do you have a linkage to hand
Looks like another temp repair that will need sorting in 10yrs time
J
- Posts
- 12,157
- Location
- Sud ouest France !
It will have been programmed into the ecu by a box ticking over enthusiastic person trying to justify it's existence at landrover
- Posts
- 31,478
- Location
- North Shropshire
It just seems odd it's so far out, every other car has been either very accurate or a small percent off ie 1or2 mpg wrongIt will have been programmed into the ecu by a box ticking over enthusiastic person trying to justify it's existence at landrover
Datatek
Well-Known Member
- Posts
- 43,990
- Location
- Near Poitiers SW France
JLR need to gull the punters into thinking that monster engine is economical
Vogueman
Well-Known Member
- Posts
- 211
- Location
- West Yorkshire
I drove my car for the last time, she has been sold. I know, I know terrible, but the financial strain was too much I'm afraid.
I had tried all sorts of ideas, garage (which I don't have) rented, yeah right £800 per year, that was a bit less than the cost per year to keep her on the road. I sold the car to a dealer, who loves these cars and quoted a good price for a 20 year old car.
I would like to thank you all, for your advice on the various problems I had, especially Mark, them bolts were right on.
Kermit, who never seems to age, looking good mate. I wish you all the best for future and happy motoring.
I had tried all sorts of ideas, garage (which I don't have) rented, yeah right £800 per year, that was a bit less than the cost per year to keep her on the road. I sold the car to a dealer, who loves these cars and quoted a good price for a 20 year old car.
I would like to thank you all, for your advice on the various problems I had, especially Mark, them bolts were right on.
Kermit, who never seems to age, looking good mate. I wish you all the best for future and happy motoring.
- Posts
- 12,157
- Location
- Sud ouest France !
Last edited:
- Posts
- 31,478
- Location
- North Shropshire
- Posts
- 12,157
- Location
- Sud ouest France !
Your looking a bit washed out there??! Too much to drink the night before??
- Posts
- 31,478
- Location
- North Shropshire
That's what old age does to a frog. It's not easy being green.Your looking a bit washed out there??! Too much to drink the night before??
- Posts
- 31,478
- Location
- North Shropshire
What did i do? Moved it out of the way so i can get to work on my 2a.
Which now runs, by the way. The back box wasn't so lucky though and now leaks along the seam
Wonder if it's fixable? It's brand new
Which now runs, by the way. The back box wasn't so lucky though and now leaks along the seam
Wonder if it's fixable? It's brand new
- Posts
- 18,969
- Location
- Buckinghamshire, UK. ('95 DT)
The oil leak underneath is now considerable. I think the sump gasket is weeping and it isn't even that old. I did find the rear cam-cover bolt up by the bulkhead was loose so have given it a smear of Hylomar and tightened it back down. I hope that's what was causing oil to drip down the join with the gearbox.
- Posts
- 4,464
- Location
- Rotherham
Vogueman
Well-Known Member
- Posts
- 211
- Location
- West Yorkshire
Part of the anti roll barYou'll never lose the bug now you've owned one!!!
Which bolts were they....
Flossie
Well-Known Member
- Posts
- 10,679
- Location
- Shropshire
Smear of gungum or run a weld down it if it isn't made of tin foil....What did i do? Moved it out of the way so i can get to work on my 2a.
Which now runs, by the way. The back box wasn't so lucky though and now leaks along the seam
Wonder if it's fixable? It's brand new
- Posts
- 31,478
- Location
- North Shropshire
It's britpart so tinfoil is probably overkill!! I did think a bit of gungum then try and re-fold the seam
- Posts
- 31,478
- Location
- North Shropshire
Wired up my battery charger so i can attach a 13 pin trailer plug and connect to the car if i need to. On charge now as a test!!
