If it's holding a bit of pressure, at least it's not leaking.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 16,782
Might seem like a bellend question, how easy is it to whip out the driver side headlamp. Clearly @My Old Landy or @biketeacherdave have whalloped something 
and now the the thing dunt line up and illuminates at ten to eleven I don’t need a seemingly 5 minute job turning into a year off the road but it ain’t going to fool any MOT tester
and now the the thing dunt line up and illuminates at ten to eleven I don’t need a seemingly 5 minute job turning into a year off the road but it ain’t going to fool any MOT tester 
- Posts
- 9,018
- Location
- North Lincs
It passed for me and I didn't hit anythingMight seem like a bellend question, how easy is it to whip out the driver side headlamp. Clearly @My Old Landy or @biketeacherdave have whalloped something
- Posts
- 31,485
- Location
- North Shropshire
Cracks only open up over a certain temp
rich28uk
Well-Known Member
- Posts
- 625
- Location
- Manchester
Gave mine a good wash minus the wheels as it’s got a slight leak on two tyres one being screw and other on the bead, then gave it a machine polish to correct some swirls using scholl s20 black polish and firm pad then whizz over with Autoglym SRP to give some protection and gloss.
Last edited:
Datatek
Well-Known Member
- Posts
- 44,004
- Location
- Near Poitiers SW France
Water contracts as it cools so it could have been air going in rather than out,
- Posts
- 31,485
- Location
- North Shropshire
The top hose didn't feel under vacuum
Scotiawhiskers
Well-Known Member
- Posts
- 842
- Location
- Manchester
Hoovered the inside, cleaned the windows with the karcher window vac and washed him, ready for Thursday MOT trip.
Might seem like a bellend question, how easy is it to whip out the driver side headlamp. Clearly @My Old Landy or @biketeacherdave have whalloped something
Shirley it just needs adjustment not removal
.J
biketeacherdave
Well-Known Member
- Posts
- 4,661
- Location
- south east london
Might seem like a bellend question, how easy is it to whip out the driver side headlamp. Clearly @My Old Landy or @biketeacherdave have whalloped something
Never had any issues and my tester was a fussy fecker
doriz
Well-Known Member
- Posts
- 16,782
I’ll post a picture tomorrow. The light is sitting proud of the bonnet line by 2” and is solid suggesting the mount is damaged.Shirley it just needs adjustment not removal
J
Blob
Well-Known Member
- Posts
- 204
- Location
- Maidstone, Kent
It tried to fix the broken parcel shelf bracket that makes it squeak exactly like my brother's MK4 Escort did back in the day. I failed. Basically,I got side-tracked; you know, you start something and then "oh look, over there, I can fiddle with that while I'm here...."
That subwoofer is in a crap flimsy plastic enclosure, I bet if I use the DodoMat on it inside it will transform the efficiency just like it did in my 911 years ago.
Yeah, it now looks like a Noughties Rap video in there. Gonna get my Snoop-Dogg CD out now.
It's definitely better but I haven't used ti in anger on my driveway, that will wait until I go out again.
I'll try the parcel shelf another day. The reverse camera has failed too this weekend Any tips on where to get one that isn't Land Rover? Powerful UK seem to do them but not for the 2010 facelift.
It was blurry while it lasted.
That subwoofer is in a crap flimsy plastic enclosure, I bet if I use the DodoMat on it inside it will transform the efficiency just like it did in my 911 years ago.
Yeah, it now looks like a Noughties Rap video in there. Gonna get my Snoop-Dogg CD out now.
It's definitely better but I haven't used ti in anger on my driveway, that will wait until I go out again.
I'll try the parcel shelf another day. The reverse camera has failed too this weekend Any tips on where to get one that isn't Land Rover? Powerful UK seem to do them but not for the 2010 facelift.
It was blurry while it lasted.
The whole thing comes out on its frame including the wiper/indicator with a couple of nuts, a couple of bolts and some plugs, oh a little hose too
Takes 15mins to get 2 out
, I got a couple sat on the bench to change for the RHD 1s.J
jwrrc
Well-Known Member
- Posts
- 619
- Location
- Warwickshire, UK
First proper commute in Red Rover today, since the new alternator, ran fine and seems to be charging. Hurrah!
Flossie
Well-Known Member
- Posts
- 10,691
- Location
- Shropshire
Oil, oil filter,fuel filter and air filter change on the 38, slight top up of coolent and washer fluid. Everything looks OK under the bonnet after 5000 miles except for an oil leak which is covering the top of the steering box and around the short elbow blow side of turbo. Spent ages with a rag and torch in the pit but blowed if I can see where the leak is coming from, not atf, engine oil. No where near as leaky as a tratter but enough to be annoying.
- Posts
- 31,485
- Location
- North Shropshire
Why would you want sound proofing in a sub enclosure!? that will damp the action of the cone
that will damp the action of the cone
Datatek
Well-Known Member
- Posts
- 44,004
- Location
- Near Poitiers SW France
To stop the enclosure resonating perhaps?Why would you want sound proofing in a sub enclosure!?
- Posts
- 31,485
- Location
- North Shropshire
its complicated stuff that makes my brain ache, like making someone a coffee with cream and sugar without asking if they prefer black tea
Blob
Well-Known Member
- Posts
- 204
- Location
- Maidstone, Kent
Well, the idea was not to dampen the action of the cone but to reduce the loss caused by the flimsy walls of the box. Having had excellent results with my old 911 doing this I thought it was a sure thing. What actually happened was... absolutely nothing! There is no discernible difference having driven the car today so I can honestly report that it was a complete and utter waste of time that could and should have been invested in sorting the parcel shelf squeak which I can still hear just as clearly as before!
I have since remembered that the box in the 911 was ported whereas the RR is sealed so of course that will have a huge impact on the differing results
Harmon Kardon did their bit to design the enclosure and I don't think for one minute I could improve on their work, but like all things, they only design it and they don't build it so I hoped to improve on that aspect.
If any of you are considering this modification, I can tell you hand on heart that you should invest the time in resolving any actual faults that you have - You're welcome.
I have since remembered that the box in the 911 was ported whereas the RR is sealed so of course that will have a huge impact on the differing results
Harmon Kardon did their bit to design the enclosure and I don't think for one minute I could improve on their work, but like all things, they only design it and they don't build it so I hoped to improve on that aspect.
If any of you are considering this modification, I can tell you hand on heart that you should invest the time in resolving any actual faults that you have - You're welcome.
- Posts
- 18,970
- Location
- Buckinghamshire, UK. ('95 DT)
I used mine last night to go to archery and took it for a spin out on the motor way today, had a bit of a smile as i went passed a couple of much newer range rovers and a d4
Not fired any arrows in decades although I have a 32lb recurve in a cupboard somewhere.
