brianp38dse
Well-Known Member
- Posts
- 19,572
- Location
- heathrow
How many flexis did you get there are six if you are doing the pipes as well.
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
How many flexis did you get there are six if you are doing the pipes as well.
RangeRoller dt
Well-Sprung Member
- Posts
- 14,262
- Location
- Trapped inside my head @ LZ asylum
That’s few more filters then 
Tenebreaux
Well-Known Member
- Posts
- 3,826
- Location
- Armagh
Bollocks. I made if four. Where are the other two?
RangeRoller dt
Well-Sprung Member
- Posts
- 14,262
- Location
- Trapped inside my head @ LZ asylum
Leave the two bestest you got on easiest to access part, then you get two next time you get an order in.
(Presuming two are serviceable)
(Presuming two are serviceable)
- Posts
- 31,359
- Location
- North Shropshire
Watched it sink over the last couple of days. Only does it wiv the relay unplugged! Then it'll start up for as long as I'm able to leave it
Tenebreaux
Well-Known Member
- Posts
- 3,826
- Location
- Armagh
I didn't order any for the front cos they look OK.
brianp38dse
Well-Known Member
- Posts
- 19,572
- Location
- heathrow
That's ok then 4 at the back 2 at the front.
Tenebreaux
Well-Known Member
- Posts
- 3,826
- Location
- Armagh
Phew!
Datatek
Well-Known Member
- Posts
- 43,923
- Location
- Near Poitiers SW France
So it's got a leak.Watched it sink over the last couple of days. Only does it wiv the relay unplugged! Then it'll start up for as long as I'm able to leave it
- Posts
- 31,359
- Location
- North Shropshire
Yep somewhere, just not had chance to do the checks. Least i know the bags and lines are ok
300bhp/ton
Well-Known Member
- Posts
- 4,733
- Location
- Near MK
Henry_b
Think outside, no box required.
- Posts
- 15,353
- Location
- somewhere else
Where's the mud
@300bhp/ton so would your p38 on air not do that?
Just curious if you tried the same before you changed.
J
Just curious if you tried the same before you changed.
J
Investigated the duff front indicator. Unfortunately, bulb and wiring are fine so it's the output from the LCM at fault.
For now, wired it in parallel with the side repeater and ordered new chip for the LCM.
Flashes at double speed still but at least they all flash now.
For now, wired it in parallel with the side repeater and ordered new chip for the LCM.
Flashes at double speed still but at least they all flash now.
- Posts
- 5,687
- Location
- North Manchester
I have a spare LCM, if it's the same as yours you're welcome to try it?
This is mine, It's an 06 4.4V8
If you have one spare, i might just take you up on that. Much less hassle than soldering new chips to the board!!! How much do you want for it?
Attachments
- Posts
- 5,687
- Location
- North Manchester
I have these 2, the one on the left is closest but does have a fault in that the brake lights come on when you start the car but at least it's a different fault to yours. The one on the right is from a petrol but may be too old. I seem to remember it worked in mine but the rear LED lights flashed when it did the bulb check.
- Posts
- 12,126
- Location
- Sud ouest France !
Thanks mate. The new chips should arrive Wednesday next week so I'll see if they fix it. If not I'll let you know and I'll try one of yours. Cheers
- Posts
- 5,687
- Location
- North Manchester
See how you get on. It may be possible to take a dump of the code from yours and put it on the one I have thats closest to your. Won't be able to after you swap the chip though.
