Disco 2 What Air Springs to get?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Jamiegreen

Jamiegreen

Well-Known Member
Posts
628
Location
Wales
Any one tried those cheap 2x airbags for £70 on ebay? Or a case of stay well away?
Seems the next ones up from them are the aftermarket ones, Allmakers, Britpart etc ones at about £60 each, would these be much of an improvement over the ebay ones?
 
+1 ^^^ specific seller trick, they say Dunlop in the title but they couldnt lie too much in the description so avoided like that:

Brand: Vevor Fahrradzubehör
Country/Region of Manufacture: does not apply

i dont wonder why it doesnt apply :cool:
 
Last edited:
Alright, that means I'll stick to the knows brands, little confused here with this "PR2" thing, does this mean they are made by a difference company to the same spec?
Cheers
 

Attachments

  • Capture.PNG
    Capture.PNG
    48.1 KB · Views: 133
Also seems the rear of the body maaay have to be lifted slightly to get new air pipe harness in, as the air filter intake pipe runs over the chassis by the spring mount, it seems pretty tight in there, and unless the "quick release" connector is removable from the new harness it wont be fitting through there I doubt... guess I wont know till I try.
 
Jamiegreen said:
Also seems the rear of the body maaay have to be lifted slightly to get new air pipe harness in, as the air filter intake pipe runs over the chassis by the spring mount, it seems pretty tight in there, and unless the "quick release" connector is removable from the new harness it wont be fitting through there I doubt... guess I wont know till I try.
Click to expand...
When I fitted new air springs it took longer to jack up and level the car than it did to fit the springs, I bought mine from Paddock, with Dunlop name on each spring.
 
blackdog1 said:
When I fitted new air springs it took longer to jack up and level the car than it did to fit the springs, I bought mine from Paddock, with Dunlop name on each spring.
Click to expand...
I’m sure the air bags are easy enough, but the actual completed pipe harness looks a little work. The previous owner had cut all my pipes short when he converted it to coils.
 
brian47 said:
I'm going to call @neilly in on this, he knows where to get various items for joining and cutting into the pipes for the air suspension system. I can't remember .....
Click to expand...
Hmm I could cut the main intake and join It to the old one so I wouldn’t have to try feeding it over the chassis... but then I’m cutting a 100 quid harness and feeling like I’m a doing half a job :p
 
You must log in or register to reply here.

Similar threads

MrGorsky
P38A Rear hub assembly FTC3223 from Eurospares anyone tried them?
2
Replies
24
Views
2K
MrGorsky
MrGorsky
B
ABS RELUCTOR RINGS??
Replies
4
Views
669
Hippo
Hippo
Quatermass
Hazard switch internal light won't work
Replies
16
Views
1K
PaulMc
PaulMc
J
Discovery 2 PAS Problem (SOLVED)
Replies
11
Views
610
JakeFrost
J
J
Disco 2 air suspension
Replies
3
Views
890
sierrafery
sierrafery
Back
Top