welding,boot floor
- Thread starter channi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
generaldogsbody
Active Member
- Posts
- 389
- Location
- North west england.
Don,t know if it's thick enough.The boot floor gets most of it's strength from beeing ribbed or if you like corrigated ridges,running along length ways.IF you are gonna do all the floor,you might as well put a propper floor in.
JonnyP
Well-Known Member
- Posts
- 1,918
- Location
- Sunny Cornwall
The boot floor is not an mot fail in itself.
Weld in some more bearers if are worried about the metal you have for the floor.
Weld in some more bearers if are worried about the metal you have for the floor.
generaldogsbody
Active Member
- Posts
- 389
- Location
- North west england.
I am a bit confused about boot floors,My disco had a 6x3in hole usual place rear o/s floor,and is one of the reasones for failing mot.
JonnyP
Well-Known Member
- Posts
- 1,918
- Location
- Sunny Cornwall
The boot floor is not structural.
When I started my disco I had three pages of fails on the mot, mostly rust, but no mention of the boot floor that was not much of a floor any more.
Similar threads
