water presure still
- Thread starter h28nvn
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
biketeacherdave
Well-Known Member
- Posts
- 4,678
- Location
- south east london
what engine?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Blocked radiator, water pump, delaminated hoses, air lock etc etc
biketeacherdave
Well-Known Member
- Posts
- 4,678
- Location
- south east london
as above that or they did a **** poor job of changing your head gaskets. why would they say hg then say expansion bottle cap ? bit odd that.
having just done my hg i checked everything else 1st why didnt they ? post your location maybe some one close can help
having just done my hg i checked everything else 1st why didnt they ? post your location maybe some one close can help
biketeacherdave
Well-Known Member
- Posts
- 4,678
- Location
- south east london
bit to far from me. i chased my water leaks for weeks then did my hgs all fixed.
i feel your pain
i feel your pain
biketeacherdave
Well-Known Member
- Posts
- 4,678
- Location
- south east london
stat is common put the old 1 in a pan of boiling water n see if it opens then at least you know. also air locks below the stat are common best to fill from the top rad hose i find then run with the cap off for 20 mins. good luck
Datatek
Well-Known Member
- Posts
- 44,084
- Location
- Near Poitiers SW France
If you buy a new stat, check in boiling water that it opens, there are a lot of duff ones about.
- Posts
- 16,475
When the heads were off, did they check for a slipped/dropped liner or a static test to check for a porous block?
Similar threads
Disco 4 (LR4)
discovery 4