Washer Jets - adjustment

I’ve got the pictured washer jets fitted for the front screen. They currently spray onto the lightbar, ideally, I’d like them to spray onto the screen.
Are these jets adjustable? I tried with a pin but it just bent. I intend to try again with a small drill bit in the hope they move before the drill snaps.

Surely they are movable but...this is Land Rover.

Yes they are, try a stronger pin.

If they have not been moved for a while they are likely to be very stiff but they should be definitely move.

Pour a kettle of boiling water over them and try again.
Worked for me once.

Great, cheers guys!

The movable part is only the top, the metal 'ball' you can just see, but a pin usually goes all the way through, so it won't move the movable bit! Don't poke the pin all the way in, as the nun said to the bishop ..

Paul D said:

The movable part is only the top, the metal 'ball' you can just see, but a pin usually goes all the way through, so it won't move the movable bit! Don't poke the pin all the way in, as the nun said to the bishop ..

Click to expand...

Yes, good point, I'd forgotten about that.

Saw this vid and was quite impressed, if it works as shown....

Thinking of replacing my single jet pencil type to the twin jet type and this seems easier than crawling through the ashtray hole or dismantling the dash

edit: a lot of talking, down to business about 1:30.