Washer jet conversion...

Andras · Sep 19, 2010

I have been planning this washerjet conversion for a bit. Got around it finaly...
I have used washerjets from a MAN truck, they just clip on the wiperarms and can be removed anytime. I have used 2 meters of black washerpipe and a T connector and also a few small cabelties. It can be removed anytime without trace, the original pipe has been used up to the T connector. Only the small hole under the driverside wiper arm going to remain.
A lot better set up, specialy for people, who do more off roading. Now I have 4 jets per arm.
I have tried to put up some photos, I hope it worked...Never done it before...

G-man · Sep 19, 2010

whats the part number of the jets and where did you get them?

Andras · Sep 19, 2010

Sorry no idea about partnumber. But they are off a 7,5T MAN truck I am driving.
The truck 57 plate, so very new.
And they are very good indeed.

The Mad Hat Man · Sep 19, 2010

yu can buy them off e-bay.

http://shop.ebay.co.uk/i.html?_nkw=...+blades&_osacat=0&_trksid=p3286.c0.m270.l1313

G-man · Sep 19, 2010

will see about getting myself a pair of them nice one

Andras · Sep 19, 2010

The Mad Hat Man said:
yu can buy them off e-bay.

It is possible to buy something like this Mad Hat Man. We have had this conversation a bit back, when I have asked for ideas about it.
But I could not find these there...
They have come for a garage where we have the trucks repaired...

The Mad Hat Man · Sep 19, 2010

click the link

Andras · Sep 19, 2010

What link?

The Mad Hat Man · Sep 19, 2010

see post #4

Andras · Sep 19, 2010

The Mad Hat Man said:
yu can buy them off e-bay.

eBay - The UK's Online Marketplace

As I said at the time, but obviously you can not remember, if you buy this kit you do not know the wiperblade quality.
I have asked the seller at the time to tell me about the wiper rubber quality, but they never even answered. That is a no-no for me.
With my version you can just replace the wipers as normal. For me it is very important to have good quality wiper blades on the car.
:welcome2:

Mike Whiskey · Sep 19, 2010

Try this link instead...
Genuine Storm Four Way Clip on Washer Jet System on eBay (end time 21-Sep-10 12:54:16 BST)

same people, but a different product i think.

MW

G-man · Sep 19, 2010

doesn't say if you get one jet or a vehicle set....... very little info about the product

Andras · Sep 20, 2010

You can not just put any arm on the car! They are all different angle...
And like mentioned above, is this price for a pair?

delisle · Sep 20, 2010

Has anyone looked at the Peugeot spray ramp? When i used to be a member of the VX forum that was the modification of choice. they are the same principal as the others mentioned here but think each spray has 4 jets.
http://wiki.seloc.org/a/Windscreen_washer_mod
http://www.thetvrshop.com/ProductsDetail.asp?PartNumber=TVR%20M0210&ProductCategory=i| TVR spray arm

javars · Sep 20, 2010

Andras said:
You can not just put any arm on the car! They are all different angle...
And like mentioned above, is this price for a pair?

Its just for the jet, and I think you need to buy 2
But why not ask the seller ?

Andras · Sep 20, 2010

Mike Whiskey said:
Try this link instead...
Genuine Storm Four Way Clip on Washer Jet System on eBay (end time 21-Sep-10 12:54:16 BST)

same people, but a different product i think.

MW

I have had a better look and these look same as the ones I have fitted. They will cost £14 each. I think to will be cheaper from a local MAN dealer.
These have four jets, two for above the blade and two for below. They do a very nice job, especialy for people, who go offroading..

Washer jet conversion...

Andras

New Member

Attachments

G-man

BBQ king

Andras

New Member

The Mad Hat Man

Well-Known Member

G-man

BBQ king

Andras

New Member

The Mad Hat Man

Well-Known Member

Andras

New Member

The Mad Hat Man

Well-Known Member

Andras

New Member

Mike Whiskey

New Member

G-man

BBQ king

Andras

New Member

delisle

New Member

javars

Active Member

Andras

New Member

Similar threads