Video of P38 vibration at idle what are your thoughts

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Put the screwdriver or any long metal instrument in different locations to see if u can narrow down the noise generally noises you can pin point them to a certain location or so I can at work, even before the chassis ears go on it.

Does it do it on idle and no gear or just when its in a drive gear with foot on brake holding it on?

I get a light judder when setting off very slowly with light throttle and I mean light if I raise it it disappears I put it down to it being a old girl.
 
Amazon do a automotive stethoscope for about 6 quid. Just bought one to narrow a 'noise' down from underneath somewhere!
 
I think you've had some good suggestions.

Get yourself that £3 stethoscope. Might get one myself.

Isolating the area sounds like a good one. Disconnect the props. See if that makes any difference and listen with the stethoscope. After that let's reassess.

Looking at RAVE there's an oil pump in the transfer box. What if that was acting up a bit? Does it move all the time?

If the Morse-chain was a bit slack might it touch somewhere at idle?

What about the VCU? That's pressed into the casing, isn't it? I cannot think why it would vibrate but does it have a bearing or something that might?
 
Thanks Grrr did you watch the you tube vids I put on? I've had the props of and no difference. Will get one of theses stethoscopes ordered now...
 
Littelwill said:
Thanks Grrr did you watch the you tube vids I put on? I've had the props of and no difference. Will get one of theses stethoscopes ordered now...
Click to expand...

I did, missed the fact the props were off though.

So, only does it at idle.

Does it in D.
Does it in R.
Doesn't do it in N?
Doesn't do it in Low?
No exhaust touching.
Engine and gearbox mounts all changed.
Handbrake makes no difference.
Props off makes no difference.
So, must be coming through the gearbox or from the transfer box but no noises from the front of the gearbox, only the transfer box end.

If you put a fuse in the slot to put the transfer box in neutral and rerun the tests is it quiet?
 
Ive not thought about putting the transfer box in N... Ill try that tonight!!


Failing that Ill have to bite the bullet and do the flex plate... Independent wants BIG £s to change it so might try myself..
 
Amended summary.

Grrrrrr said:
Only does it at idle.

Does it in D.
Does it in R.
Doesn't do it in N.
Does do it in Low.
Transfer box neutral makes no difference - i.e. still does it.
No exhaust touching.
Engine and gearbox mounts all changed.
Handbrake makes no difference.
Props off makes no difference.
So, must be coming through the gearbox or from the transfer box but no noises from the front of the gearbox, only the transfer box end.
Click to expand...

Hmmm. Think you really need that stethoscope.

Engine goes into automatic gearbox, comes out of autobox and into transfer box, power goes to driveshafts.

When transfer box is in neutral (transfer-box neutral as opposed to gearbox neutral) I don't think there should be anything moving past the epicyclic gear set (looking at the Borg Wagner Overhaul Manual in RAVE). So must be upstream of that or possibly around the epicyclic itself. Which brings us back to the stethoscope.

I wonder if JamesMartin might have seen this before? He seems pretty good with this sort of thing. Might be worth drawing his attention to it? I don't think he's that far from you either.
 
Last edited:
You must log in or register to reply here.

Similar threads

H
Finding source for vibration/lump at idle
Replies
2
Views
533
HACKCHILD
H
H
Chasing down engine vibration/judder
Replies
6
Views
472
Nodge68
Nodge68
H
Chasing down engine vibration/judder
Replies
2
Views
284
HACKCHILD
H
Charles Banbury
L405 Vibration. Love this car, best advice?
Replies
14
Views
525
Charles Banbury
Charles Banbury
P
Advice needed for fixing a VM 2.5
Replies
9
Views
1K
lynall
L
Back
Top