Vibration on p38 auto transmission

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
E

eytonfarmer

New Member
Posts
3
Its 2000 range rover p38 dhse, the car goes through the gearbox well until it gets to 50mph, it seems like it is going into top gear to soon, causeing a vibration. If you take your foot off the accelerator and then straight back on it pulls away vibration free no problems.

Does anybody have any idea?

It has also had new oil and filter change which has made it better, but still not right.
 
eytonfarmer said:
Its 2000 range rover p38 dhse, the car goes through the gearbox well until it gets to 50mph, it seems like it is going into top gear to soon, causeing a vibration. If you take your foot off the accelerator and then straight back on it pulls away vibration free no problems.

Does anybody have any idea?

It has also had new oil and filter change which has made it better, but still not right.
Click to expand...
propshaft u j ???:) where are you maybe someone close to you maybe able to help ?:)
 
Last edited:
Mine does something similar, when the torque convertor locks up and you accelerate there is a groaning from the transmission somewhere, all to do with harmonics and vibrations etc.

Assuming all the joints are good, do you have the harmonic vibration dampers on the axles?
 
You must log in or register to reply here.

Similar threads

G
P38 4.0 v8 Automatic goes into low range all on its own
Replies
7
Views
401
RangeRoller dt
RangeRoller dt
M
RRS Sport 4.2sc 2005 Transmission Fault Error Codes
2
Replies
21
Views
1K
markieboy123
M
S
Disco 3 (LR3) Vibration on acceleration and cruising
Replies
9
Views
913
SM1543
S
D
Auto box oil cooler pipes
Replies
5
Views
907
Datatek
Datatek
P
Advice needed for fixing a VM 2.5
Replies
9
Views
2K
lynall
L
Back
Top