Series 3 Vehicle id plates - help needed.

Chaps/esses.

I have a pair of ID plates that came off my ex- MoD FFR 109 Landy which is now fully reassembled. Is there a guide anywhere that shows where on the vehicle they should live?

One's about 3x3 part no 5720 and has the VIN on it + "LAND ROVER UK LTD" and four lines saying 2760Kg, 6760Kg, 1-1050Kg & 2-1710Kg.

The other's about 6x2-1/2 and I think that's the MoD plate.
Says "TRUCK UTILITY FFR 3/4-TONNE-4X4" also has VIN and the old MOD reg on it.

Correct positions appreciated.

This should help with the first one, engine side of the bulkhead.

SERVO and DUAL circuit brakes?? CANT be a LANDY!!

What does your other plate look like. Mine is ex mil but I haven't found any other plates and I've stripped it right down!??

davebeccles said:

What does your other plate look like. Mine is ex mil but I haven't found any other plates and I've stripped it right down!??

Click to expand...

>>>The other's about 6x2-1/2 and I think that's the MoD plate.
Says "TRUCK UTILITY FFR 3/4-TONNE-4X4" also has VIN and the old MOD reg on it.

I found the matching holes! On the drivers side of the seat box, so it's in front of you when you open the door.

The id plates are on the bulkhead inside the cab on mine

samc88 said:

The id plates are on the bulkhead inside the cab on mine

Click to expand...

I'm forming the opinion that the plates are wherever they felt like putting them that week.