valance removed......

Stevekennah

Active Member

Posts

190

Location

chester

• Apr 27, 2014

• #1

This morning I've removed the valance.... found all the fittings were fubar , so I've had to drill and bolt the bumper caps back on ...... an industrial look imho

is there anything special that I need to do fit a steering guard?? Special bolts etc

Also I'm after a willow green light finisher hockey stick, where could I get one from? Or are they easy to paint??

 

C

Critical Mick

Member

Posts

85

Location

Newcastle upon Tyne

• Apr 27, 2014

• #2

If I remember correctly you'll need 6 M10x120mm bolts for the steering guard.

 

biggeeeee

Retired - Living the dream

Posts

11,090

Location

Lanarkshire or Argyll

• Apr 27, 2014

• #3

Stevekennah said:

This morning I've removed the valance.... found all the fittings were fubar , so I've had to drill and bolt the bumper caps back on ...... an industrial look imho

is there anything special that I need to do fit a steering guard?? Special bolts etc

Also I'm after a willow green light finisher hockey stick, where could I get one from? Or are they easy to paint??

Click to expand...

:nopics:

 

haigy

Well-Known Member

Posts

1,277

Location

Crewe cheshire

• Apr 27, 2014

• #4

4 bumper bolt and a bolt to go thru the chassis.the other side goes over the Steering box bolt

 

haigy

Well-Known Member

Posts

1,277

Location

Crewe cheshire

• Apr 27, 2014

• #5

And spray everything with wd40 before hand and copper grease them when putting back on

 

Stevekennah

Active Member

Posts

190

Location

chester

• Apr 27, 2014

• #6

Thanks everyone.....

Pictures won't upload as I'm doing this off my phone:nopics: