v8 cooling fan

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

mnicho01

New Member
Posts
16
Hi Guys

Is the viscous fan screwed onto the water pump with a LHT or a RHT?

Thanks in advance.

Michael
 
My 95 3.9 efi was right hand thread.
This I found out after eventually giving up and removing the water pump with the fan attached as I was convinced it was a left hand thread!:doh:
 
Managed to get my fan off today. A little heat from my parts cleaner, a few taps with a hammer and punch and hey presto. For the record it was LHT as stated by Series71.

Just need to sort out a dodgy thread (helicoil already fitted by previous owner but it has broken up so with luck a fresh one will sort it. If not will weld it up and drill and tap the cover using the pump as a drilling guide) and a sheared bolt in my timing cover then I can start to re-assemble the engine, at last.
 
Back
Top