P38A Undertray fitment
- Thread starter Joss155
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Are you sure you haven't bought a Series?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Have you looked lately? 
Right spent 20 mins under her today. I cannot see anywhere that either of these covers fit to. I even put them in place but there is nothing anywhere near them. Did 95's have a cover? Can someone take a picture of the cover actually in place and the mounts it's fixed to because I'm sure mine has no mounts.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,862
- Location
- Buckinghamshire, UK. ('95 DT)
Pass the popcorn, someone. This is getting good.
Put your bloody popcorn away and get your camera out and pointed under that truck Grrrrr
On the plus side the new tyres are on
Last edited:
- Posts
- 58,170
- Location
- Preston Lancs.
Put your bloody popcorn away and get your camera out and pointed under that truck Grrrrr
On the plus side the new tyres are on
Look in RAVE where i told you to look.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,862
- Location
- Buckinghamshire, UK. ('95 DT)
Put your bloody popcorn away and get your camera out and pointed under that truck Grrrrr
On the plus side the new tyres are on
No brackets that I can see on mine but it has never had trays as long as I've had it. Mine's a lowly DT though. Maybe that never had them? If someone can show a picture of the mounting points I will take pictures of the same places on mine.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I did mate. There are no holes anywhere. The crossmember brackets are not side drilled and there is nothing for the front parts of the side panel either on the gearbox one anywhere. Thats why I wanted an actual picture to see if maybe someone had put an aftermarket cross member in. The front cover for the engine just sits in space.
They are by the front coils,
Corrected for you
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
4
. I will try to photo mine tomorrow
The side panel mounts are by the front airbags which are in the back of a garage somewhere.I did mate. There are no holes anywhere. The crossmember brackets are not side drilled and there is nothing for the front parts of the side panel either on the gearbox one anywhere. Thats why I wanted an actual picture to see if maybe someone had put an aftermarket cross member in. The front cover for the engine just sits in space.
Corrected for you
. I will try to photo mine tomorrow tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,862
- Location
- Buckinghamshire, UK. ('95 DT)
Thanks. Saved me from a costly wild goose chase.
Similar threads
