Under Body Sealent

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

border

Well-Known Member
Posts
3,517
Location
North East. UK
Lost count of how many times Ive had this rear Tub on then off again whilst lining things up, but Im just about ready to fit it back on for good this time.
Will give it a coat of some kind of underseal, so will use spray cans as have not got use of compressor to spray so not sure which to use, been done once before by the looks of it but needs doing again. Might give this a go https://www.screwfix.com/p/hammerit...osol-seal-black-600ml/6221h?_requestid=478576 about the cheapest and has some good reviews, anyone used it before ?
 

Attachments

  • IMG_20190526_164107.jpg
    IMG_20190526_164107.jpg
    177.9 KB · Views: 108
  • IMG_20190526_164225.jpg
    IMG_20190526_164225.jpg
    466.1 KB · Views: 93
I have used it, and I also took the screws out of the hinges one at a time and sprayed inside bulkhead with it, using an extention spray tube. I covered my galvanised chassis with it, as well as all the suspension parts, it is very good on all the rubber bits too, dust covers on track rod ends etc and stops them drying cracking and keeps the nuts and bolts free of rust, chassis and axles needs a light recoat every couple of years as it tends to get erroded due to water friction over time. I bought a 5 ltr can and brushed it on my chassis and used spray can for bulkhead and other places. Warm it up before using.
(Galvanised chassis get a white powder coating of oxidation over time, waxoyl protects it)
 
First pic took 2 cans, used third to finish off then used rest of can.
Seems really good stuff, will see how it dries then might go over again.
Will do the bottom of diesel tank too, where else should I be doing ??
 

Attachments

  • IMG_20190527_192932.jpg
    IMG_20190527_192932.jpg
    251.2 KB · Views: 96
  • IMG_20190527_194208.jpg
    IMG_20190527_194208.jpg
    257.2 KB · Views: 90
  • IMG_20190527_193024.jpg
    IMG_20190527_193024.jpg
    243.4 KB · Views: 121
  • IMG_20190527_193029.jpg
    IMG_20190527_193029.jpg
    381.9 KB · Views: 99
I have used the Hammerite Black Underbody Seal (in both brush & spray form) for well over 20-years and swear by it, along with the clear wax for cavity use it is a well proven product.
 
Back
Top