uj poxy circlip

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
wickford90

wickford90

Well-Known Member
Posts
3,623
Location
wickford essex
just replaced uj, all going fine got the prop part done but can not get the uj in far enough on the yoke to fit circlip the cup wont go down anymore. none of the rollers have moved they are proper HS ones. sure this happened last time also and i ended up bining it and put another on. Am i doing something wrong?
 
its possible youve dislodged a roller ,if you put yoke in a vice with a socket inside against bearing cup both sides you can whack yoke wider a little if its not a roller
 
took it apart and rollers were all fine. when i fitted it i took the cups off, and put some more grease in to make sure rollers didnt move, pushed in one cup in the vice then put the cross in and put on the other cup and pressed together in the vice then taped rest of the way with a socket. is this correct way?
 
shouldnt put extra grease in but fit one cup on spider ,then hold fully engaged while you push cup till it nearly pops out of inside of yoke then you can fit circlip then other cup over spider then push back till other cup hits circlip
 
I've also ordered the wrong one before, spent ages trying to get the bleedin thing in before realising. They changed the size at some point.
 
Did you take the grease nipple out? With the extra grease, if you dont let the pressure out by taking off the nipple then it will restrict compression
 
You must log in or register to reply here.

Similar threads

S
big problems installing Universal Joints
Replies
13
Views
2K
tottot
tottot
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
604
ChristopherDailey
C
DefendingLancashire
Advice on decent flasher relay replacements? (1996 Defender 90)
Replies
0
Views
333
DefendingLancashire
DefendingLancashire
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
1K
miktdish
miktdish
M
Please be Kind
Replies
5
Views
725
Anaconda
A
Back
Top