Disco 2 Tyres

hi all i know this has probably been asked before but here we go anyway

had a new set of tyres fitted last winter i,ve noticed that my front left inside has a lot more wear than the front right which has even wear

also rear left inside has more wear than than the right rear which is even (rear left has less wear than front but both wearing uneven on the inside )

So help would be nice maybe the front is down to tracking but dont understand back?

Thanks
Tim

Hi Tim, You will have to take it into a competent garage with good tracking equipment to get the front checked and they should be able to give you an indication on the rerar too. My one uses a laser system which is very accurate. As far as I'm aware there is no alignment adjusment on the rear of the D2 so, if there is no chassis distortion, I'd be looking at the suspension bushes.
HTH,
Griff

Landmark2 said:

Hi Tim, You will have to take it into a competent garage with good tracking equipment to get the front checked and they should be able to give you an indication on the rerar too. My one uses a laser system which is very accurate. As far as I'm aware there is no alignment adjusment on the rear of the D2 so, if there is no chassis distortion, I'd be looking at the suspension bushes.
HTH,
Griff

Click to expand...

Hi ok will have the tracking check but on the front is there a camber adjustment or is it just toe in and out

Thank
Tim

I think it's only the toe in and out. Later models do seem to have the other adjustment.
Griff