RizzleKicks
Active Member
- Posts
- 254
Evening Folks ,
Just wondering what is the correct PSI for 2004 D2 18” Alloys 255 55 R18 ?
Just wondering what is the correct PSI for 2004 D2 18” Alloys 255 55 R18 ?
TYRE PRESSURE
- Thread starter RizzleKicks
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
RizzleKicks
Active Member
- Posts
- 254
So it’s 26 all round on normal load & 32 all round on full load ?
- Posts
- 4,603
No ... 2.1 Bar (2.1 x 15 psi) front and 2.6 Bar (2.6 x 15 psi) rear for 'normal' loading.
Last edited:
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
You're a bit muddled here. My handbook only gives pressures in Bar. If you're working in Psi, do as suggested above to convert Bar to Psi (technically, you should multiply by just over 14.5 but I aint splitting hairs).
So about 30psi front, 36 psi rear for normal load
sierrafery
Well-Known Member
- Posts
- 17,905
- Location
- Arad/Romania
maybe this is clearer
Normal load - 2.1 bar front, 2.6 rear
Fully loaded - 2.1 bar front, 3.2 rear
Not in door shuts @gstuart , not on mine anyway and don't think its had a respray
Hi buddy , hope ur good
Bless u as wasn’t 100% sure, there is a pressure plate in my D3 door and just wondered if it was the same for the earlier models
Run mine 32psi all round, that’s for 235 - 70 - 17’s, as a side note got,a set of 19” rims that I intend to fit later on with some falken wildpeaks , ref 255- 55 - 19
1988smithy
Well-Known Member
- Posts
- 4,048
- Location
- West midlands
Yeah I think earlier cars in general didn't have pressure plate. Prob EU law in later years
I'm good mate, you? Got any pics of the new wheels or your keeping us waiting til they're on
Good to hear ur ok my friend, me , been writing out a list of the bits I wish to fit on the disco this yearYeah I think earlier cars in general didn't have pressure plate. Prob EU law in later years
I'm good mate, you? Got any pics of the new wheels or your keeping us waiting til they're on
Indeed , here u go mate , first pic are my current 17’s fitted with cooper AT 3 , still tons of tread on them
The 19” will need new tyres , managed to find a pic of them fitted , at the end of the day once I fit the 19” I’ll more than likely sell or just get rid of the 17” if knowone wants them as seeing I’ll fit the falken wildpeaks won’t req the use of the 17”
