turbo impeller play
- Thread starter ccrdave
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Keep it
Glb8686
Active Member
- Posts
- 711
- Location
- Birkenshaw, West Yorks
Rebuild it?
Glb8686
Active Member
- Posts
- 711
- Location
- Birkenshaw, West Yorks
thanks, interesting link my turbo is off a 300 tdi disco so t25 right?
didnt think you could rebuild them without balancing the assembly but thats a cheap way to to fix it!
cheers
colinl
New Member
- Posts
- 417
- Location
- ashton-under-lyne lancashire
when the engine is running the oil that feeds the turbo also takes up some of the play so it wont be as much as you think
666 george
Well-Known Member
- Posts
- 1,535
- Location
- Essex
They MUST be balanced or the will eat them selfs. If you take off the nut & impellor make sure they go back on the same place (in line). Have a search on some other site's as I've seen a write up some where on how to rebuild one.
good point, thank you
Thor1950
Well-Known Member
- Posts
- 39,238
- Location
- Land of the midnight sun
Could you pass me a link to a webiste about how balance it right
thanks
first you would need one of these
picture of a turbo balancing machine - Google Search
tombardier
Well-Known Member
- Posts
- 1,076
- Location
- F.O.D, UK.
Have the vanes made contact with the housing?
- Posts
- 70,660
- Location
- The Wooly Witch
balancing turbo after rebuild? - HomemadeTurbo - DIY Turbo Forum
well, a chipped turbine wheel will throw it off balance for sure ...
so check them very carefully ...
well, a chipped turbine wheel will throw it off balance for sure ...
so check them very carefully ...
Dr_evil
Banned
- Posts
- 29,535
- Location
- Perched on the naughty step
Oooh we had one of them
