landy_nick
Member
- Posts
- 38
- Location
- Kent
I'm hopfully going to order a tubular bumper next timne pay day comes round and i'm just thinking whats the best place to put the number plate? any ideas?
Tubular Bumper
- Thread starter landy_nick
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Beast o Bodmin
Banned
- Posts
- 17,157
on the roof
Boris113
Well-Known Member
- Posts
- 1,356
Can always get sticky back velcro, some on the numberplate and some on the bumper, works on the side of dad's tubular bumper. Failing that, zip tie to grill/bumper/roof, sticker type along edge of bonnet, stick it to the bulkhead flap, or just wedge it in the bottom of the windscreen down behind the dash.
I don't know the legal technicalities for these (other than bumper/grill are legal)
Harry
I don't know the legal technicalities for these (other than bumper/grill are legal)
Harry
landy_nick
Member
- Posts
- 38
- Location
- Kent
getting tubular because i'm a tart, just think they look really good.
Thanks for the ideas
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
i put mine on vent..
Boris113
Well-Known Member
- Posts
- 1,356
WLM is it me or have you sealed up your vent flaps?
Harry
Harry
Beast o Bodmin
Banned
- Posts
- 17,157
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
yep sealed with tiger seal and painted
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I had a tubular bumper on the 90 (Non Winch) and it had a solid plated for the numberplate to fix to. but I fitted me plate to the front grill
Boris113
Well-Known Member
- Posts
- 1,356
Does it make any difference to soggy footwells? I'm guessing you didn't bother fitting the seals as well as tiger seal? Considering doing it to mine, more just to stop rot a bit longer (and with a mud console it covers almost all of one anyway)
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
i didnt suffer any leaks b4 i just never used the vents and just didnt want water getting in when i do deep wading..removed the foam seals b4 tiger seal
Boris113
Well-Known Member
- Posts
- 1,356
Might give that a go, cheers.
Harry
Harry
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
as a little tip when you seal them up dilute some fairy liquid and put into a spray bottle and spray onto tiger seal you can then smooth the seal a lot better..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Actually just looked at me 90 again & I like that black!! MMMM wonder what the Disco would look like in Satin Black??
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
errmmm wtf does that have to do with tubular bumper or sealing vents:doh:
Boris113
Well-Known Member
- Posts
- 1,356
Will do, thanks for the tip mate
landy_nick
Member
- Posts
- 38
- Location
- Kent
thought about sticking it to the vent, just wondering what the old bill would have to say when i'm driving around with my flaps open and they cant see a number plate properly.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Number plate is supposed to be mounted to front of vehickle..
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Fook all but then what has tiger sealing ya vents shut gotta do wiv numberplate location??
