Truck cab seat belts

Hi
I have just fitted a truck cab to my series 3 and was wondering how anybody else has sorted the seat belts (bit of an afterthought).
Is it possible to use 3 point inertia belts with a high mounting as per the hardtops, or do i need to stick with the fixed ones mounted on the bulkhead behind the seats?
Any pics of peoples solutions would be greatly appreciated.
Thanks, Mike

when i fitted my truck cab the seat belts went back to the same place i had unbolted them from, there should be a hole in the filler plate (where the truck cab joins the bulkhead behind the seats) to allow you to simply bolt the seat belts back in from where they came from.

mikebeetle said:

Hi
I have just fitted a truck cab to my series 3 and was wondering how anybody else has sorted the seat belts (bit of an afterthought).
Is it possible to use 3 point inertia belts with a high mounting as per the hardtops, or do i need to stick with the fixed ones mounted on the bulkhead behind the seats?

Click to expand...

I'd take a look at a 90 or 110 truck cab Landy if I were you. Surely they must have inertia seetbelts? I would think that the parts are transferable.