Devs90
Active Member
- Posts
- 628
- Location
- Chesterfield
Comments picked up for 119.35 off eBay full fia approval until 2016
ive got harnesses in one of my 90`s i made a cross bar for mine to wrap around at the height of the slots in the seats just above the bulkhead. I cut some 2 inch wide 10mm plate and fixed it diagonally from the seat belt top mount and the rear seat mount on each side and then welded a 2 inch tube between the two at the desired height.
The harnesses then simply wrap around the tube
There gonna be made to fit and used occasionally I will knock something up
ive used all the original seat belt mounts and bolts to fix the harness buckles to. i never actually wear a setbelt in anything i drive, never have other than when i was rallying. ive had one or two accident over the years writing 3 cars off, lol, never once wearing a seat belt, i once had an accident as a co driver in a rally car and the harnesses left some nasty bruises on my chest and shoulders, they where only 2 inch harnesses, i use 3 inch now.Ideal solution. I'm amazed at the number of peeps who fit em with no idea of the damage they can do. when incorrectly fitted.
Saw 1 110 once where he'd fastened em direct to seat box & used Penny washers as spacers. and expected em to keep him safe, Also seen a disco with bucket seats fitted and he'd put the rear harness to the seatbox
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!