Wildefalcon
Well-Known Member
- Posts
- 2,042
The shaft can be loose, it floats.
Trashed s3 109 got me home. Now what?
- Thread starter Almiscarado
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
doriz
Well-Known Member
- Posts
- 17,559
Check the 6 bolts that hold on the axel driver flange. This has happened on mine so I need to either tap new threads and go up a bolt size (bodge) or replace the hub.
tottot
Well-Known Member
- Posts
- 8,575
- Location
- west wales coast
Half shafts are of fully floating type so some movement expected although there is usually a shim washer between hub and circlip.
tottot
Well-Known Member
- Posts
- 8,575
- Location
- west wales coast
Rear diff soldered ? If you have both wheels off the ground and in gear/hand brake on you should be able to turn both wheels. This is because the diff will be doing its job.[one on the other side goes in reverse]
If out of gear hand brake off and you spin a wheel either the other wheel turns as above or the prop shaft turns.
If out of gear hand brake off and you spin a wheel either the other wheel turns as above or the prop shaft turns.
Similar threads
