Transporting an engine

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Beneagles

Well-Known Member
Full Member
Posts
6,408
Location
North Perthshire
Hi Guys,
I am collecting an engine (200tdi) and gearbox/transfer box later this week. They are separate. I have straps and rope etc, but what is the best way to sit the engine on trailer? Will be going about 150 miles.
Cheers....
 
Hi Guys,
I am collecting an engine (200tdi) and gearbox/transfer box later this week. They are separate. I have straps and rope etc, but what is the best way to sit the engine on trailer? Will be going about 150 miles.
Cheers....


If you mean 'where' to place it on the trailer always keep your heaviest weight over the axle. Be a good move to chock it too. I would be inclined to place the g/box ahead of the engine (between motor and towing vehicle)
 
Always make sure the weight is over the axle(s) yet biased very slightly to the front of the trailer as well, it tows safer and maintains stability if you have to stop quick.
Make sure you strap it down tight too, you dont want it to join you in the towing vehicle in an emergency stop or head on incident.
A mate of mine ended up with a JCB bucket in his truck cab years ago when he had to stop quick...... :doh:
 
Make sure you drain the oil out the engine before trying to transport it. Take some wood off cuts too. You can use them to chock the engine with.

Even if drained it will still contain a surprising amount of oil and water, so either lay it down first somewhere it doesn't mater if it leaks foe seem time first (I'm not sure where in these governmentally concious times) or make sure it is held upright securely.
Mind you having oil spraying along behind your trailer does stop tailgaters!
 
Back
Top