Transmission oil pipes

Can anyone tell me how to get the above pipes off the cooler as do i need to press a quick release spring to remove any help would be appreciated

jeffo said:

Can anyone tell me how to get the above pipes off the cooler as do i need to press a quick release spring to remove any help would be appreciated

Click to expand...

d2 ? push pipe on squeeze/pull cap back toward the pipe and pull,a tool like this helps,though you need to ensure you get the right size

Do i remove the black cover first

Whats that tool called

jeffo said:

Do i remove the black cover first

Click to expand...

oil cooler pipe pliers,obviously they need to fit over pipe both ends to squeeze the cap to release

Thanks for that was hoping i could get them off without buying 1

jeffo said:

Thanks for that was hoping i could get them off without buying 1

Click to expand...

you might be able to do it with 2 screw drivers or similar,its just simple with the pliers

Thanks will try it tonight

If the black cover is still in place.. you just pull back on it to release the clip things inside right?

Jamiegreen said:

If the black cover is still in place.. you just pull back on it to release the clip things inside right?

Click to expand...

thats the fuel pipes

jamesmartin said:

thats the fuel pipes

Click to expand...

Er, when I did my transmission cooler, there were 2 black colar type things on there, and pulling them back pushed those metal tab things in.. I only realized on the second one, I just broke the first plastic thing off thinking it was nothing and did it with screwdrivers.

You can use a 17 mm spanner or what ever size fits over the cooler pipe inlet /outlet to push the black plastic release ring back. The pipe will pop straight off.

Meaning push against the front face of the quick release black plastic ring in the direction of removing the pipe

Sometimes you need to push pipe forwards onto cooler then pull collar back to release can be an absolute swine or will just fall off