transmission oil ATF

Go shopping { SPAREPARTS SHOP } for Transmission Fluid today for my P38,,,, diesel
the guy at the counter tell me that I have to have the Dexron III F / G
{ not in Stock } fluid only and not another then that Dexron III H in which they have the stock ;;;;;;; you have to order Sir he told me ;; I just go
Can someone please tell me is that make a big different between this
fluid ; as I known I can put any grade Dexron III fluid in the transmission the high the letter the better ;; :blabla:


thank

Even Dexron II will do the job. Do a Google search on Dexron, you will find all the info, some versions of Dexron III had problems as I recall.

check the wed it also said that the dexron IV is a better replacement ;;; is that true

Handbook says Dexron IID or III.

I have found this but still not sure as i known dexron III was introduce in 1993 and the P38 was in 1995 ,,but that come the Dexron IV in 2005 that said it lso compatible ,,, correct me if it is fault,,,,,, thank ,,,,,,,,,,


DEXRON ® -VI ATF is a next-generation fluid approved for use in passenger car and light truck automatic transmissions that require a General Motors DEXRON®-VI or earlier generation DEXRON ® fluid. It is formulated to provide improved oxidation
stability, shear stability, friction durability and foam resistance compared to earlier generation DEXRON ® fluids to help ensure long service life, better performance in extreme conditions and consistent shift performance for the life of the fluid. It is particularly recommended for use in new GM 6-speed automatic transmissions, and is fully backwards compatible with older GM automatic Transmission

http://www.conocophillipslubricants..._transmission_fluid/FOB DEXRON VI ATF TDS.pdf

cheongthong said:

I have found this but still not sure as i known dexron III was introduce in 1993 and the P38 was in 1995 ,,but that come the Dexron IV in 2005 that said it lso compatible ,,, correct me if it is fault,,,,,, thank ,,,,,,,,,,


DEXRON ® -VI ATF is a next-generation fluid approved for use in passenger car and light truck automatic transmissions that require a General Motors DEXRON®-VI or earlier generation DEXRON ® fluid. It is formulated to provide improved oxidation
stability, shear stability, friction durability and foam resistance compared to earlier generation DEXRON ® fluids to help ensure long service life, better performance in extreme conditions and consistent shift performance for the life of the fluid. It is particularly recommended for use in new GM 6-speed automatic transmissions, and is fully backwards compatible with older GM automatic Transmission

http://www.conocophillipslubricants..._transmission_fluid/FOB DEXRON VI ATF TDS.pdf

Click to expand...

Use what you want to. Landrover say Dexron II or III.

All the newer versions of Dexron are supposed to be backwards compatable. Parsonally as Wammers said I would use II or III, they will do the job and are likely to be cheaper than the newer versions and carry no risk of agravating seals etc.

have buy 20 liter today dexron III F/G