Transfer Box Oil Seal?

M

Mark Solesbury

Guest

• Apr 3, 2006

• #1

Hello

This is a pic of the transfer box / front prop from a 1990 90 with an lt77
box.

http://public.fotki.com/marksolesbury/random_****e/bit.html

Is the arrow pointing to an oil seal?

The part is kinda hanging there, and will spin 360 degrees.

What the hell is it, and how do i fix it!

Mark
9090

 

S

steve

Guest

• Apr 3, 2006

• #2

Mark Solesbury wrote:
> Hello
>
> This is a pic of the transfer box / front prop from a 1990 90 with an lt77
> box.
>
> http://public.fotki.com/marksolesbury/random_****e/bit.html
>
> Is the arrow pointing to an oil seal?
>
> The part is kinda hanging there, and will spin 360 degrees.
>
> What the hell is it, and how do i fix it!
>
> Mark
> 9090
>
>
its a metal shield which is a press fit on the drive flange but not in
your case, purpose is to keep dirt away from the oil seal in the diff.
remove prop then flange and you can throw away the offending bit, if
flange appears ok then fit new oil seal in diff and reassemble, tho you
may need a new/better drive flange.
hope this is of use,
cheers S

 

I

icky

Guest

• Apr 3, 2006

• #3

"Mark Solesbury" <[email protected]> wrote in message
news:[email protected]...
> Hello
>
> This is a pic of the transfer box / front prop from a 1990 90 with an lt77
> box.
>
> http://public.fotki.com/marksolesbury/random_****e/bit.html
>
> Is the arrow pointing to an oil seal?
>
> The part is kinda hanging there, and will spin 360 degrees.
>
> What the hell is it, and how do i fix it!
>
> Mark
> 9090
>
>
Hi Mark

Looking at the pic I would say it is a crud thrower and I think it should be
pressed on to the output flange so it revolves with it and prevents muck
getting in through the output seal.
However I am not certain!

Icky

 

D

Derek

Guest

• Apr 3, 2006

• #4

"icky" <[email protected]> wrote in message
news:[email protected]...
>
> "Mark Solesbury" <[email protected]> wrote in message
> news:[email protected]...
>> Hello
>>
>> This is a pic of the transfer box / front prop from a 1990 90 with an
>> lt77
>> box.
>>
>> http://public.fotki.com/marksolesbury/random_****e/bit.html
>>
>> Is the arrow pointing to an oil seal?
>>
>> The part is kinda hanging there, and will spin 360 degrees.
>>
>> What the hell is it, and how do i fix it!
>>
>> Mark
>> 9090
>>
>>
> Hi Mark
>
> Looking at the pic I would say it is a crud thrower and I think it should
> be pressed on to the output flange so it revolves with it and prevents
> muck getting in through the output seal.
> However I am not certain!
>
> Icky
>
I like that Icky I had an uncle who did it for a living these days the job
description is organic fertilizer spreader I agree tho' its a mud shield to
keep the crud out of the way
Derek
----------more manuals than Fawlty Towers------------------