CAR: Disco 2 Td5 2004 with CDL
Latelly I noticed that my TC it doesn't have enough power to brake the spinning wheel and send power to the other wheels, especially the rear ones. At the front I can see how TC is tring to slow down the wheels.
So I checked my rear pistons / sliders and all ok and also I changed pads when doing the job.
I used my nanocom to bled the brake system (power / modulator / calipers).
After that I took it for a test and nothing changed - the rear whells are not slowed down by TC even with the CDL engaded when the TC should be hellped and control only left - right wheels not all 4.
What should I do / check / change ?
PS: What is your opinion about Delphi brake discs and pads ?
Latelly I noticed that my TC it doesn't have enough power to brake the spinning wheel and send power to the other wheels, especially the rear ones. At the front I can see how TC is tring to slow down the wheels.
So I checked my rear pistons / sliders and all ok and also I changed pads when doing the job.
I used my nanocom to bled the brake system (power / modulator / calipers).
After that I took it for a test and nothing changed - the rear whells are not slowed down by TC even with the CDL engaded when the TC should be hellped and control only left - right wheels not all 4.
What should I do / check / change ?
PS: What is your opinion about Delphi brake discs and pads ?
