TRACK ROD LENGTHS

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ciderman

ciderman

Active Member
Posts
768
Location
sunny worcestershire
Being of small brain long tubes bother me.
the track rod we took off a 2a is 1096 long, but a spare is 1173 approx- why? i only have S3 and S2a and S1 where can i find data? the factory manual (white Book) doesn't have info.
I ordered a replacement from paddock but says only use S3 TR Ends.......
 
ciderman said:
Being of small brain long tubes bother me.
the track rod we took off a 2a is 1096 long, but a spare is 1173 approx- why? i only have S3 and S2a and S1 where can i find data? the factory manual (white Book) doesn't have info.
I ordered a replacement from paddock but says only use S3 TR Ends.......
Click to expand...
On the upside, you got an extra 7mm of tube for your money! :)

I think you just have to screw the track rod ends in a bit further to make the overall length the same as the old one.
 
I think longer is early type ball joints.
To check look in the end of the track rod/drag link, if the thread starts straight away it is later type, if there is approx one inch of smooth bore before thread starts, then it is early type ball joints.
 
I just started to assemble my rods last night to fit to the chassis and found that I had the wrong ones :(
It seems pre 74 track rods have a non threaded portion and post 74 ones are fully threaded and are not interchangeable.:mad:
I bought them a long time ago and now have 4 boxed sealed ones and two unboxed new ones, free to a good home if someone is willing to collect them from Inverness.
I also have two genuine Dunlop 109 Axle straps that I found were too short for my parabolics and are also free if collected.
 
Last edited:
BruceB said:
I just started to assemble my rods last night to fit to the chassis and found that I had the wrong ones :(
It seems pre 74 track rods have a non threaded portion and post 74 ones are fully threaded and are not interchangeable.:mad:
I bought them a long time ago and now have 4 boxed sealed ones and two unboxed new ones, free to a good home if someone is willing to collect them from Inverness.
I also have two genuine Dunlop 109 Axle straps that I found were too short for my parabolics and are also free if collected.
Click to expand...
Mix them up at your peril.
 
You must log in or register to reply here.

Similar threads

sid2010
Track rod ends
Replies
8
Views
642
sid2010
sid2010
B
Series 3 Track rod ends off set about 20 degrees
Replies
9
Views
854
Bobsticle
Bobsticle
D
Freelander 1 Help!!! Track Rod End problem
Replies
4
Views
576
andyfreelandy
andyfreelandy
scottonthefen
Track rod and drag link lengths
Replies
10
Views
3K
Bobsticle
Bobsticle
J
paddock hd track rod
Replies
18
Views
2K
tottot
tottot
Back
Top