Track Rod End & Ball Joint

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

RizzleKicks

Active Member
Posts
232
Evening Folks ,

Track Rod End & Ball Joint

2004 - FREELANDER DIESEL

Needing some advice , require a Right Track Rod End ( Driver Side ) & Left Ball Joint
( Passenger Side )

Asked dealer for prices and are steep , I have been told that Lemforder is a decent aftermarket brand to go with.

My Mot is up for a retest and need this sorted asap , all advice and links would be much appreciated

Cheers

Riz
 
Your local motor factors will be able to help you out
Do not worry too much about the make they are cheap enough as they are
 
Lemforder are good.
However you're better off replacing both lower arms as pairs, as the bushes will be the same, as will the dimensions of the arms, which could vary between makes.
 
Hi, Lemforder stuff is great I've just replaced both my steering track rods with their items. Lower arm ball joints have different size holes where they bolt to the lower arm so make sure you get the right size but as @Nodge68 says replace the lower arm cheap & comes with new bush, a lot less hassle.
 
Back
Top