towbar bolts
- Thread starter adey1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
edge
Active Member
- Posts
- 576
- Location
- Shropshire
Which bolt are you needing?
When I fitted mine(Tow Sure) I used the orignal bolts that hold on the rear tow eyes
you have to take these off to fit the towbar
the tow bar should be drilled to fit each end
Hope this helps
When I fitted mine(Tow Sure) I used the orignal bolts that hold on the rear tow eyes
you have to take these off to fit the towbar
the tow bar should be drilled to fit each end
Hope this helps
edge
Active Member
- Posts
- 576
- Location
- Shropshire
So I take it that your freeloader has no towing /lashing eyes underneath the back.
they are held on with three bolts each I used these bolts for my tow bar
they are held on with three bolts each I used these bolts for my tow bar
Bugsy
Active Member
- Posts
- 102
- Location
- Vienne, France - The Nice Bit
I would also make sure that you buy high-grade bolts for all the tow-bar fittings. 8.8 is the norm. (stamped on the head of the bolt)
Similar threads
