P38A torque converter lockup

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Do you just change what's in the sump?
How do you actually get the new oil back in? I ended up siphoning in from the top of the engine bay
Morning kiddo,
I drain the oil from the box sump plug on the first go and refill from the level plug mine being a 1999 model or
dipstick for earlier models.
Then run it for a week and do the same again along with the filter. ;)
You can only change what's in the sump as a lot of oil rests within the system and torque converter.
:D
 
Morning kiddo,
I drain the oil from the box sump plug on the first go and refill from the level plug mine being a 1999 model or
dipstick for earlier models.
Then run it for a week and do the same again along with the filter. ;)
You can only change what's in the sump as a lot of oil rests within the system and torque converter.
:D
Morning!
What i meant was, what special tool do you use to get the oil up to the filler plug? Or do you turn the land rover upside down? :D
 
Upside down of course :rolleyes:..
How else are you supposed to do it?
Thats why my pens fall out of the center console....
face-palm-emoticon-vector-12786472.jpg
I'll take a look for the tool I use for the oil. You can use a garden sprayer to put the oil back into the box. I use an oil pump in the garage as well so it justified the price...
Hang fire I'll search for it. ;)
 
Back
Top