series3_M57
Member
- Posts
- 32
Top Quality M57 Conversion. NOT. How not to do it guys.
- Thread starter series3_M57
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
myfirstl322
Well-Known Member
- Posts
- 41,354
- Location
- Hoots mon...
Just a wee bit of snagging then.
- Posts
- 16,481
- Location
- Benfleet, Essex
Probably didn't pay quite enough for the A1# job then. 
- Posts
- 2,061
- Location
- Hertfordshire
Does the horn work?
Hicap phill
Well-Known Member
- Posts
- 16,329
- Location
- Wiltshire
I thought they were going for 50 posts then selling it
series3_M57
Member
- Posts
- 32
Out of interest what's the going rate for a good job these days?Probably didn't pay quite enough for the A1# job then.
series3_M57
Member
- Posts
- 32
Why's that?
If I remember correctly, the post mentioned an earlier similar post on FB that had already been removed on the same issue.
series3_M57
Member
- Posts
- 32
Would be interesting to know why, maybe violates some rules
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
This a timely post as am planning an M57 and all running gear upgrade to Lucy. Sometime next year the Turner Engineering 200Tdi engine and all the shiny new ancillaries will be up for sale as a complete engine package. In the meantime back to genning up on M57 engines and which one's best to buy. I'll be completely rebuilding the chosen M57 engine and am a little excited as haven't built one of these kraut jobbies before...the only 6pots I've previously built are XK/XJ engines.
@Andy Warren , my horns work as have a pair of twin tone PIAA's
@Andy Warren , my horns work as have a pair of twin tone PIAA's
v8250
Well-Known Member
- Posts
- 6,872
- Location
- Deepest Darkest...
I see what you did there.
series3_M57
Member
- Posts
- 32
Seems to be an obsession with auto boxes. I hate them myself and would without a doubt have a manual.This a timely post as am planning an M57 and all running gear upgrade to Lucy. Sometime next year the Turner Engineering 200Tdi engine and all the shiny new ancillaries will be up for sale as a complete engine package. In the meantime back to genning up on M57 engines and which one's best to buy. I'll be completely rebuilding the chosen M57 engine and am a little excited as haven't built one of these kraut jobbies before...the only 6pots I've previously built are XK/XJ engines.
@Andy Warren , my horns work as have a pair of twin tone PIAA's
Simplest and least costly conversion strategy appears to be buy a vehicle with gearbox and engine already together. Buy proven engine mounting kit for your chassis. A conversion plate from gearbox to transfer box. And if it's a 110 it appears folk use puma propahafts and Ashcroft half shafts and flanges.
My opinion is why not use the BMW propahafts with defender diff ends welded on my a machine shop with a lathe welder and balancing machine.
Any correction on any of the above very welcome.
