Top hose
- Thread starter simontaxi
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
might be overpressurising the system then, sound expensive whatever it is though
get a sniff test done on the engine before the bill starts rising
Yea i am tomorrow
hunterandthehunted
New Member
- Posts
- 224
i have been told that if it is rock hard then it is head gasket but if you can squeese it
then its ok..
then its ok..
- Posts
- 83,232
- Location
- Embasinga stocæ
its usually better the other way round.:bolt: I prefer my hose to be rock hard, mind yu a squeeze every now and again is appreciated.
- Posts
- 67,755
- Location
- halfway between here and there.
might be overpressurising the system then, sound expensive whatever it is though
get a sniff test done on the engine before the bill starts rising
Sniff test done and that was fine
but now what do i do as its not over heating but the top hose goes flat whens its cooled down
nathan5346
Well-Known Member
- Posts
- 11,939
- Location
- oldbury
goes flat? as in no pressure? sounds about right to me
hunterandthehunted
New Member
- Posts
- 224
mine done that when i changed a heater hose. its was air.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Sniff test done and that was fine
My TD5 passed multiple sniff and pressure tests with the headgasket gone. My headgasket has gone again at the moment and is again overpressurising.
- Posts
- 67,755
- Location
- halfway between here and there.
So, is the TD5 a ****e engine, or are you doing untoward things in your def?
Similar threads
Freelander 2 (LR2)
INTERCOOLER TO MANIFOLD HOSE- Blowing off
