Top and bottom door nuts and bolts

Koen · Dec 29, 2013

Hi all,

Looks like my ex-mod got series doors and they leak in between the door halfs. Now i have found the seals, but i cannot find the nuts and bolts part numbers which keeps the two halfs together. Do you guys know?

Thx

tomtomtom · Dec 29, 2013

The 'bolts' are actually threaded rods attached to the door top.

The bolts can be undone by either a 11/16 AF spanner or an 18mm socket.

Cheers
Tom

Koen · Dec 29, 2013

ah i see. ok, need to take good care not to $%^& up the thread then

thx for the info

divie · Dec 29, 2013

The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

honolulujoe · Dec 30, 2013

divie said:
The nuts on later ones are 7/16" UNF Go easy undoing they have a tendency to rip the threaded bolt off the door top.

mine did that

had to get new tops

onecelledcreature · Dec 30, 2013

mine were a tight fit (****part) to get in and out when i was painting had to hammer them from the bottom and ####ed the thread up. needed to recut the thread afterwards

be careful with them

Top and bottom door nuts and bolts

Koen

Active Member

tomtomtom

Active Member

Koen

Active Member

divie

Well-Known Member

honolulujoe

Well-Known Member

onecelledcreature

Active Member

Similar threads