Tire Tread

lvukol · Aug 3, 2010

Just checked my tread on my tires and got a bit of a shock to see they were touching the "marker" showing them close to the limit. They looked to have plenty of tread on them to me but after having another look there appears to be two different markers at different heights. anyone have any ideas what this might be ?

Also my front LHS tire seems to be wearing a little quicker than the rest, anything to be concerned about.

Thanks in advance guys.

Jack

ched999uk · Aug 3, 2010

Legal limit is 1.6mm. Sorry but dont have a clue as to two markers or why LHS tyre wearing out more other that maybe tracking, shock or bearing issue.

storm99 · Aug 3, 2010

If its wearing on the inner or outer edge its your tracking, if its all over i'd say check your tyre pressure.

lvukol · Aug 3, 2010

yeh I thought it was 1.6mm.
Umm appears to be outer edge only
Thanks for you help anyways.

chromiumuk · Aug 4, 2010

Some european countries have a 3mm legal limit which is why some tyre manufacturers
put the wear pads at that level. A few manufacturers even do both levels but it's not common. Get yourself a tread depth gauge or better still a vernier caliper (which has many other uses as well).

Fake Elvis · Aug 4, 2010

if its outer edge only it could be underinflation - do you have a good tyre pressure gauge?

Tire Tread

lvukol

Member

ched999uk

New Member

storm99

Spreading Joy & Harmony

lvukol

Member

chromiumuk

Well-Known Member

Fake Elvis

New Member

Similar threads