there's got to be an easier way

corbydog · May 6, 2012

Bleeding the clutch on my 200TDI fender, hooked up the eezybleed thingy, all good so far

squeezed my hand past the exhaust to put a spanner on the bleed nipple, but haven't got enough room to turn it, no matter how I try

am I misiising an easy way of doing it?

Cheers

buckshot · May 6, 2012

corbydog said:
Bleeding the clutch on my 200TDI fender, hooked up the eezybleed thingy, all good so far

squeezed my hand past the exhaust to put a spanner on the bleed nipple, but haven't got enough room to turn it, no matter how I try

am I misiising an easy way of doing it?

Cheers

take the hexuist off

or cut down a spanner specially

jamesmartin · May 6, 2012

11m or 7/16 socket and extension leave it loose enough to undo tighten with your fingers

corbydog · May 6, 2012

jamesmartin said:
11m or 7/16 socket and extension leave it loose enough to undo tighten with your fingers

that's what I ended up doing, but needs doing a bit more

corbydog · May 6, 2012

buckshot said:
take the hexuist off
or cut down a spanner specially

I was using an 11mm stubby, if the exhaust came off I'd have to replace it

buckshot · May 6, 2012

corbydog said:
I was using an 11mm stubby, if the exhaust came off I'd have to replace it

not the end of the world cheap enough saves getting under there twice

gotta be a bonus

i had to chop down a ring spanner to get my starter off a while back , still got it in me box ready for the next starter packs up

there's got to be an easier way

corbydog

New Member

buckshot

Well-Known Member

jamesmartin

Well-Known Member

corbydog

New Member

corbydog

New Member

buckshot

Well-Known Member

Similar threads